Thingiverse
![The Frog Arm Exoskeleton Glove v0.5 by profbink](/previews/8531693.jpg)
The Frog Arm Exoskeleton Glove v0.5 by profbink
by Thingiverse
Last crawled date: 3 years, 2 months ago
The Frog Arm is an experimental device for people who have some degree of paralysis distal to the elbow. Extending the elbow opens the fingers. This device does nothing to close the fingers, but many hands in paralysis are closed at rest, so they should close again on their own when the user bends the elbow.
I developed this design with a hemispherectomy patient. She had too much spasticity in her fingers for this device to work properly. And because she had reduced pain sensitivity, I decided against increasing the force on the fingers. I didn't want to risk doing harm. For someone whose fingers are less rigid, this might work better.
The Frog Arm is an experimental device. It may not be effective for your circumstance. If you have any doubts about safety, please do not use the device without the guidance of a medical professional. And please provide lots of feedback to me. If you can share your successes and failures with the device, or think of ways to improve the device, I would be very grateful.
Here is the instructions document as it stands. I will work to improve instructions in the coming months, so check back from time to time.
https://docs.google.com/document/d/1Nv1oTv5YnUUTnmsWfX3kXzpXNK5IyiDMPcxxBVYKJCA/edit?usp=sharing
I developed this design with a hemispherectomy patient. She had too much spasticity in her fingers for this device to work properly. And because she had reduced pain sensitivity, I decided against increasing the force on the fingers. I didn't want to risk doing harm. For someone whose fingers are less rigid, this might work better.
The Frog Arm is an experimental device. It may not be effective for your circumstance. If you have any doubts about safety, please do not use the device without the guidance of a medical professional. And please provide lots of feedback to me. If you can share your successes and failures with the device, or think of ways to improve the device, I would be very grateful.
Here is the instructions document as it stands. I will work to improve instructions in the coming months, so check back from time to time.
https://docs.google.com/document/d/1Nv1oTv5YnUUTnmsWfX3kXzpXNK5IyiDMPcxxBVYKJCA/edit?usp=sharing
Similar models
thingiverse
free
![Airy Arm 2015 by enj2307](/t/8688536.jpg)
Airy Arm 2015 by enj2307
...lease share your device under a different name, to avoid confusion in the future.
thank you for helping to further this project.
thingiverse
free
![F1 steering wheel W11 (BETA) by abekiroglu](/t/8366697.jpg)
F1 steering wheel W11 (BETA) by abekiroglu
...gress, if you want to improve you can. i do not have time for this project, so i shared this meybe it will be helpful for anyone.
thingiverse
free
![Shelby Cobra Logo Ring by Jabot_Designs](/t/8351965.jpg)
Shelby Cobra Logo Ring by Jabot_Designs
...gns
thingiverse
had some spare time, so i made this. i designed it to fit my finger, so you might have to scale it to fit yours.
thingiverse
free
![Frog Ring by theroar](/t/8353830.jpg)
Frog Ring by theroar
...grader janitza. she agreed to share it with you and i created a lesson if you want to make your own. https://youtu.be/bv7gmvjktu4
thingiverse
free
![Finger Cover for people with Arthritis. DO NOT PRINT. by nikki_the_gryphon](/t/8839076.jpg)
Finger Cover for people with Arthritis. DO NOT PRINT. by nikki_the_gryphon
... show what i have so far. if you have any ideas or suggestions please let me know. i repeat, do not print or make some other way.
thingiverse
free
![Hyperlite Arm Protectors Bumpers by SSBelmont](/t/8799486.jpg)
Hyperlite Arm Protectors Bumpers by SSBelmont
...reate one and share it for all.
for all your 3d creators all there, share, share, share your designs, that is what its all about.
thingiverse
free
![Terminator Arm that WORKS! by AntsinAfrica](/t/8833005.jpg)
Terminator Arm that WORKS! by AntsinAfrica
...st to reply. i will be posting a making-of video on youtube soon. visit www.antsinafrica.co.za for more info.
have fun and enjoy!
thingiverse
free
![Bruce by LeonTeoh](/t/8940597.jpg)
Bruce by LeonTeoh
... it with you guys, (i do not own a personal 3d printer yet for now ) or if you find it helpful,please do send me a msg , cheers !
thingiverse
free
![Dumpling Press by Oggie](/t/8698721.jpg)
Dumpling Press by Oggie
...differentiate different fillings.
they both work great, really solid.
if you make them maybe share your filling ideas. good luck.
thingiverse
free
![Universal Parametric Lens Cap](/t/4834245.jpg)
Universal Parametric Lens Cap
...ut if you have any idea how to improve this thing your help is welcome! or you can donate me to buy a new filament. :) thank you!
Profbink
thingiverse
free
![Peregrine's forearm by profbink](/t/8985608.jpg)
Peregrine's forearm by profbink
...39;s forearm by profbink
thingiverse
this is a model i made in blender, based on photos of a casting of peregrine's forearm.
thingiverse
free
![Peregrine's left hand by profbink](/t/9005363.jpg)
Peregrine's left hand by profbink
...thingiverse
this is a scan of a casting of peregrine's hand, using a makerbot digitizer. i smoothed the model using blender.
thingiverse
free
![Cozy Enclosure for Solidoodle 3 by profbink](/t/9014977.jpg)
Cozy Enclosure for Solidoodle 3 by profbink
...ozy enclosure for solidoodle 3 by profbink
thingiverse
i wanted to strengthen my abs prints, so decided to make an acrylic case.
thingiverse
free
![Ear Savers (Ear relief for mask wearing) by profbink](/t/8123711.jpg)
Ear Savers (Ear relief for mask wearing) by profbink
... that slips behind the sweatband of the hat to hold it up.
prints quickly flat on the print bed. scale if you like. share freely.
thingiverse
free
![Talon Flextensor 1.0 by profbink](/t/8980527.jpg)
Talon Flextensor 1.0 by profbink
...tensor relies on both the user's wrist flexor and extensor muscles, which should be preferable from a therapeutic standpoint.
thingiverse
free
![Talon Hand 3.0 by profbink](/t/635136.jpg)
Talon Hand 3.0 by profbink
...t cables:https://www.youtube.com/watch?v=rtojln_bhts
for more information or to get involved, visit http://enablingthefuture.org/
thingiverse
free
![Ody Hand 2.1 by profbink](/t/9001291.jpg)
Ody Hand 2.1 by profbink
...e abs) and/or underextruding printers. i also widened the cable channels in the fingers so it's easier to install the cables.
thingiverse
free
![Dual Action Cable Anchor (Flextender) by profbink](/t/8999001.jpg)
Dual Action Cable Anchor (Flextender) by profbink
...jg&feature=youtu.be
for more information or to get involved, visit http://enablingthefuture.org/
files updated march 31, 2014
thingiverse
free
![e-Nable Device Sizing Blender file by profbink](/t/8962054.jpg)
e-Nable Device Sizing Blender file by profbink
...with the scaling process. please follow the youtube video tutorial series in the instructions to learn the image scaling process.
thingiverse
free
![Ultimaker 2, 2+, Extended spool holder for really big spools by profbink](/t/8544906.jpg)
Ultimaker 2, 2+, Extended spool holder for really big spools by profbink
...eft. it works great. and the printer didn't even tip over from all the weight in the back! ;)
my tweaks were done in blender.
Exoskeleton
thingiverse
free
![Exoskeleton](/t/4776794.jpg)
Exoskeleton
...exoskeleton
thingiverse
class project
thingiverse
free
![Exoskeleton by ShayterAndrey](/t/5023666.jpg)
Exoskeleton by ShayterAndrey
...exoskeleton by shayterandrey
thingiverse
https://www.youtube.com/watch?v=gcgeeiigaom
exoskeleton for less hand fatigue.
thingiverse
free
![exoskeleton hand by cpester1997](/t/8887425.jpg)
exoskeleton hand by cpester1997
...exoskeleton hand by cpester1997
thingiverse
an exoskeleton for your hand. many attachments for this can be made.
thingiverse
free
![Engineer Exoskeleton by Mentalist](/t/8971343.jpg)
Engineer Exoskeleton by Mentalist
...ton,
equiped with a mega drill and a grabbing tool.
usefull during outer space construction aswell
as fighting off alien attacks!
thingiverse
free
![Iphone 7 exoskeleton minimalistic cover by wporcek](/t/8691406.jpg)
Iphone 7 exoskeleton minimalistic cover by wporcek
...iphone 7 exoskeleton minimalistic cover by wporcek
thingiverse
exoskeleton style minimalistic cover for the i-phone 7
thingiverse
free
![Exoskeleton Unfinished by crilancelo](/t/8868807.jpg)
Exoskeleton Unfinished by crilancelo
...ton unfinished by crilancelo
thingiverse
prototipos de unas piernas . futuro exoesqueleto. cualquier comentario sera bienvenido.
thingiverse
free
![3D Printed Exoskeleton Hands by andreslarezbas](/t/8577879.jpg)
3D Printed Exoskeleton Hands by andreslarezbas
...3ufr-0. for the latest 3d printed exoskeleton updates visit https://sellfy.com/3dprintit. my website is http://3dprintit.com.au/.
thingiverse
free
![Mark 2 Inspired Iron man Exoskeleton Arm by Budwin](/t/8343933.jpg)
Mark 2 Inspired Iron man Exoskeleton Arm by Budwin
...mark 2 inspired iron man exoskeleton arm by budwin
thingiverse
mark 2 inspired iron man exoskeleton arm
enjoy
thingiverse
free
![Exoskeleton Mask by pinkbeetle](/t/8767174.jpg)
Exoskeleton Mask by pinkbeetle
...ace if you will be walking a lot the setae have bumps on the inside for your tactile pleasure. modeled on a 3d scan of my face.
thingiverse
free
![gopro exoskeleton by zgbot](/t/9057002.jpg)
gopro exoskeleton by zgbot
...o my own site http://www.tmophoto.com/product-category/3d-product-download/
.
.
.
.
.
.
.protective case for a naked gopro camera
V0
thingiverse
free
![NEMA17 model v0 by Installer](/t/8918753.jpg)
NEMA17 model v0 by Installer
...nema17 model v0 by installer
thingiverse
nema17 model v0
thingiverse
free
![Voron V0 deck pannel by smolboi](/t/9674468.jpg)
Voron V0 deck pannel by smolboi
...voron v0 deck pannel by smolboi
thingiverse
bottom pannel for the v0. sections can fit in the v0 build volume.
thingiverse
free
![Voron V0 spool holder by smolboi](/t/9674470.jpg)
Voron V0 spool holder by smolboi
...voron v0 spool holder by smolboi
thingiverse
a better spool holder for the v0.
thingiverse
free
![Snapback holder v0 by dstrax](/t/8501594.jpg)
Snapback holder v0 by dstrax
...snapback holder v0 by dstrax
thingiverse
thingiverse
free
![Voron V0 half back panel by smolboi](/t/9674478.jpg)
Voron V0 half back panel by smolboi
...voron v0 half back panel by smolboi
thingiverse
short back pannel for the v0
thingiverse
free
![Voron V0 bed wago compartment by smolboi](/t/9674480.jpg)
Voron V0 bed wago compartment by smolboi
...voron v0 bed wago compartment by smolboi
thingiverse
v0 bed separator for wago clips.
thingiverse
free
![lampshade v0 by nicogreg23](/t/8578834.jpg)
lampshade v0 by nicogreg23
...lampshade v0 by nicogreg23
thingiverse
first attempt to design something in fusion 360!
i hope it will be appreciated!
thingiverse
free
![Voron V0 nf crazy hf mk8 frame by smolboi](/t/9674476.jpg)
Voron V0 nf crazy hf mk8 frame by smolboi
...voron v0 nf crazy hf mk8 frame by smolboi
thingiverse
v0 mount for the nf crazy high flow with the newer mk8 mounting frame.
thingiverse
free
![Voron v0 ADXL345 Mount by VBXNwi3mk3s](/t/8499458.jpg)
Voron v0 ADXL345 Mount by VBXNwi3mk3s
...s://ja.aliexpress.com/item/32831977529.html)
compression fixation : three m2x8mm screws.
accelerometer fixed : two m2x6mm screws
thingiverse
free
![Voron V0 pocketwatch nema 17 by smolboi](/t/9674479.jpg)
Voron V0 pocketwatch nema 17 by smolboi
...voron v0 pocketwatch nema 17 by smolboi
thingiverse
nema 17 plate for the pocketwatch extruder.
Frog
thingiverse
free
![frog](/t/4790696.jpg)
frog
...frog
thingiverse
frog
thingiverse
free
![Frog by ilcalvelage](/t/8342269.jpg)
Frog by ilcalvelage
...frog by ilcalvelage
thingiverse
a frog
thingiverse
free
![frog by Syzguru11](/t/8595638.jpg)
frog by Syzguru11
...frog by syzguru11
thingiverse
frog
thingiverse
free
![Frog by Wei_5](/t/8629911.jpg)
Frog by Wei_5
...frog by wei_5
thingiverse
frog
thingiverse
free
![A frog by pumpkinhead3d](/t/8607948.jpg)
A frog by pumpkinhead3d
...a frog by pumpkinhead3d
thingiverse
a frog.
thingiverse
free
![Frog mask](/t/4746313.jpg)
Frog mask
...frog mask
thingiverse
frog mask
thingiverse
free
![Frog stencil](/t/4668542.jpg)
Frog stencil
...frog stencil
thingiverse
frog stencil
thingiverse
free
![frog by jeplans](/t/8801077.jpg)
frog by jeplans
...frog by jeplans
thingiverse
frog head
thingiverse
free
![frog by mixtec](/t/8308208.jpg)
frog by mixtec
...frog by mixtec
thingiverse
a little garden frog.
thingiverse
free
![Frog Swarm](/t/4872894.jpg)
Frog Swarm
...frog swarm
thingiverse
a poison frog swarm
Glove
thingiverse
free
![wearable gloves](/t/4806527.jpg)
wearable gloves
...wearable gloves
thingiverse
they're wearable gloves my friend made.
thingiverse
free
![wearable gloves](/t/4779316.jpg)
wearable gloves
...wearable gloves
thingiverse
some gloves that i made that are fit to a custom size
thingiverse
free
![Glove by charly52](/t/8751818.jpg)
Glove by charly52
...glove by charly52
thingiverse
winter glove, fitting for playmobil. for child scale down to 72%.
thingiverse
free
![Glove Catcher by Angrypencil](/t/8090099.jpg)
Glove Catcher by Angrypencil
...ingiverse
design made for medical gloves. you can mount it on the glove mount to help prevent gloves from falling to the ground.
thingiverse
free
![Boxing Gloves by brett_k](/t/9021201.jpg)
Boxing Gloves by brett_k
...boxing gloves by brett_k
thingiverse
3d model of boxing gloves
thingiverse
free
![Glove by Red33330](/t/8849330.jpg)
Glove by Red33330
...giverse
this is a 3d scanned glove cleaned up a bit in mesh mixer
http://scootersflimflams.tumblr.com/
here is my 3d print blog!
thingiverse
free
![Boxing Glove by abrokadabra](/t/8828060.jpg)
Boxing Glove by abrokadabra
...boxing glove by abrokadabra
thingiverse
mirror it for the other glove.
sculpted with sculptris
thingiverse
free
![Glove hanger by Juonio](/t/8740992.jpg)
Glove hanger by Juonio
...glove hanger by juonio
thingiverse
designed hanger to dry wet kid gloves,
thingiverse
free
![Baseball Glove Stand by charm29](/t/8170548.jpg)
Baseball Glove Stand by charm29
...29
thingiverse
this is a baseball glove stand. you put your glove on it to display the glove, while keeping it in it's form.
thingiverse
free
![Glove package holder](/t/4908779.jpg)
Glove package holder
...glove package holder
thingiverse
holder for the most common thing of a printer user, gloves
Arm
thingiverse
free
![ARM](/t/4704415.jpg)
ARM
...arm
thingiverse
arm
thingiverse
free
![Myoelectric Arm, Arm portion](/t/4847513.jpg)
Myoelectric Arm, Arm portion
... in attachment for the circuit board and hardware, no socket, but general arm designed to be used with ada hand from open bionics
thingiverse
free
![ARMS!!!!!!! by MJD](/t/8895597.jpg)
ARMS!!!!!!! by MJD
...arms!!!!!!! by mjd
thingiverse
arms!!
now your creation can have arms.
got a ball and socket joint, why not an arm too?
thingiverse
free
![Steering Arm](/t/4872970.jpg)
Steering Arm
...steering arm
thingiverse
steering arm
thingiverse
free
![ARM by Zoha](/t/8908377.jpg)
ARM by Zoha
...arm by zoha
thingiverse
arm for dji
thingiverse
free
![Prosthetic arm](/t/4864641.jpg)
Prosthetic arm
...prosthetic arm
thingiverse
prosthetics arm
3d printable
thingiverse
free
![Trailing Arm](/t/4776596.jpg)
Trailing Arm
...trailing arm
thingiverse
trailing arm for baja truck.
thingiverse
free
![Arm by Prattotyper](/t/9064354.jpg)
Arm by Prattotyper
...arm by prattotyper
thingiverse
an arm modelled by taehoon kim
thingiverse
free
![Arm Extension for Micro Robot Arm by mingpoo](/t/8678561.jpg)
Arm Extension for Micro Robot Arm by mingpoo
...arm extension for micro robot arm by mingpoo
thingiverse
an extension that works with the micro robot arm.
thingiverse
free
![Coat of Arms](/t/4970965.jpg)
Coat of Arms
...coat of arms
thingiverse
coat of arms - english bolle (bolles) family
5
thingiverse
free
![5 X 5 CUP by TWard891](/t/8063512.jpg)
5 X 5 CUP by TWard891
...5 x 5 cup by tward891
thingiverse
just my design 5 inch x 5 inch cup. super simple
thingiverse
free
![Tri-Ominos gamepiece 5-5-5 by daveboschma](/t/9685528.jpg)
Tri-Ominos gamepiece 5-5-5 by daveboschma
... i filled with correction fluid to make them white.
printed upside down, with raft to make it not curl up on the sharp corners...
thingiverse
free
![2"5 or 3"5 to 5"25 adapter by Claymore](/t/8063021.jpg)
2"5 or 3"5 to 5"25 adapter by Claymore
...ndard specifications.
the source file is an openscad file avalaible on github
in order to execute it you need these prerequisited
thingiverse
free
![5](/t/4683855.jpg)
5
... the chonkster_yt mystery started on the place where its ending. congratulations. you will find me at roblox: 958 578 774 224 000
thingiverse
free
![[5]cycloparaphenylene](/t/4912483.jpg)
[5]cycloparaphenylene
...[5]cycloparaphenylene
thingiverse
this model is a licorice representation of the molecule [5]cycloparaphenylene.
thingiverse
free
![Ender-5](/t/4704135.jpg)
Ender-5
...ngiverse
3d model of ender-5.
attention: there are some changes in later versions on ender-5, so use this 3d model with caution.
thingiverse
free
![Werkzeugleiste 5 / Toolbar 5 by CBiker](/t/8869494.jpg)
Werkzeugleiste 5 / Toolbar 5 by CBiker
...werkzeugleiste 5 / toolbar 5 by cbiker
thingiverse
werkzeughalter fuer kugelschreiber und marker.
thingiverse
free
![5 + 5 Cart holder for GBA and DS by Adrien5567](/t/8015751.jpg)
5 + 5 Cart holder for GBA and DS by Adrien5567
...5 + 5 cart holder for gba and ds by adrien5567
thingiverse
5 + 5 cart holder for gba and ds
thingiverse
free
![Mookie 5 Session 5 mount by MykoB](/t/8049229.jpg)
Mookie 5 Session 5 mount by MykoB
...ount by mykob
thingiverse
session 5 mount for my frame mookie 5. mount width is 21mm. mount can be set to 20, 30 and 40 degrees.
thingiverse
free
![ventilador doble ender 3, 5, 5 pro, 5 plus by johnkiu](/t/8340231.jpg)
ventilador doble ender 3, 5, 5 pro, 5 plus by johnkiu
...ventilador doble ender 3, 5, 5 pro, 5 plus by johnkiu
thingiverse
https://www.thingiverse.com/thing:4441076