Thingiverse
The FITHINATOR: A case for a Pi Zero W and 2.2" ILI9341 LCD by yesrod
by Thingiverse
Last crawled date: 4 years, 11 months ago
This is a case that holds a 2.2" ILI9341 LCD module and a Pi Zero W (probably fits a normal Pi Zero as well). The case was originally designed for the FITHINATOR, a TF2 server monitor.
https://github.com/yesrod/fithinator/
To get the LCD module in you'll need to slide it in at an angle enough to get it past the lip for the lid, then wiggle it around a bit until it's flush with the front opening, then it should slide down into the bottom channel.
You will need two M1.8 or M2 x 5mm self-tapping screws (or something close in size) to screw on the lid.
https://github.com/yesrod/fithinator/
To get the LCD module in you'll need to slide it in at an angle enough to get it past the lip for the lid, then wiggle it around a bit until it's flush with the front opening, then it should slide down into the bottom channel.
You will need two M1.8 or M2 x 5mm self-tapping screws (or something close in size) to screw on the lid.