Thingiverse
The Effectocooler. The 2 in 1 delta effector and print cooler by SirPrintyMcPrinterperson
by Thingiverse
Last crawled date: 4 years, 1 month ago
This part is designed for most Delta 3D printers, and is designed for an E3D V6 hotend. Assembly is easy. You just need 2 3mm diameter bolts (some spare ones from your delta kit should do) and some nuts to fit onto the bolts. This is built for a 50mm x 15mm blower fan. Another optional but recommended thing to do is to wrap the heater block in heat proof tape, or heat proof silicon. This is just a prototype, but I am having a guy print it off for me and I'll let you know if it works or not. If I did my calculations correctly, everything should be okay. Thank you and I hope you have a great day.
Note: I should also add this. I took heavy inspiration for this design off of this magnetic ball effector print cooler designed for a jhead hotend designed by user TTN, so I want to give credit where credit is due and give him a huge shout out for inspiring me to design the effectocoller. http://www.thingiverse.com/thing:1173365
Note: I should also add this. I took heavy inspiration for this design off of this magnetic ball effector print cooler designed for a jhead hotend designed by user TTN, so I want to give credit where credit is due and give him a huge shout out for inspiring me to design the effectocoller. http://www.thingiverse.com/thing:1173365