Thingiverse
Thailand & Provinces by tsbrownie
by Thingiverse
Last crawled date: 4 years, 3 months ago
An attractive map of Thailand's provinces. For decoration or learning.
About 18.5 cms or 8 inches tall and 13 cms or 5 inches as is.
Printing:
Used Cura 4.10.0
eSun PLA+ (Nozzle 215C, Bed 66C)
Profiles 0.20
Infill 40%
Can add ironing or such to make the top layer smoother.
Ensure your project is flat on the print bed, and the print bed is set consistently corner to corner and is paper thickness from the nozzle. Too big a gap produces poor results (poor adhesion, clumping, stringing, ...)
About 18.5 cms or 8 inches tall and 13 cms or 5 inches as is.
Printing:
Used Cura 4.10.0
eSun PLA+ (Nozzle 215C, Bed 66C)
Profiles 0.20
Infill 40%
Can add ironing or such to make the top layer smoother.
Ensure your project is flat on the print bed, and the print bed is set consistently corner to corner and is paper thickness from the nozzle. Too big a gap produces poor results (poor adhesion, clumping, stringing, ...)