Thingiverse
TGH Sherpa Wire Strap by HumboldtEF
by Thingiverse
Last crawled date: 4 years, 3 months ago
Straps to manage wires on the Team Garage Hack Sherpa with the forward motor mount. This strap is used to keep wires that cross over the transfer case away from the driveshafts.
I made these thicker at the bolt holes so you can fully tighten the screws without the flexible filament giving way.
Requires 2 straps, uses the stock screws, screws are tight but do fit with some force.
Weight unknown, it doesn't register on my scale which is pretty sensitive at lower weights
I made these thicker at the bolt holes so you can fully tighten the screws without the flexible filament giving way.
Requires 2 straps, uses the stock screws, screws are tight but do fit with some force.
Weight unknown, it doesn't register on my scale which is pretty sensitive at lower weights