Thingiverse
Tevo Tornado/Creality CR-10 Chimera Dual Extruder base module for K3D modular cooling system by Elektrolenin
by Thingiverse
Last crawled date: 4 years, 1 month ago
Tevo Tornado/Creality CR-10 Chimera Extruder base module for K3D modular cooling system
It's a mount and cooling system base module for e3d chimera dual extruder Tevo Tornado/Creality CR-10/Ender-3 upgrade. If you want to use it on your printer, you will need to buy and assemble e3d chimera extruder and print cooling modules for K3D modular cooling system:
5015 fan cooling module: https://www.thingiverse.com/thing:2938019
40mm fan cooling module: https://www.thingiverse.com/thing:2938032
You may also need BLTouch mount module:
https://www.thingiverse.com/thing:2938059
Advantages:
Modular design allows you to easily change the configuration when you want it
Cooling modules are designed in such a way that the air flow is directed only to the zone requiring cooling.
No glue is required for assembly
All modules are interchangeable
The rails can be printed horizontally
If you design your module with the same rails, it will fit into the system
If you design a base module with the same rail position relative to the extruder nozzle, then all modules will fit into it and will work.
K3D Modular cooling system was created to replace all the others. It gives unlimited possibilities for expansion due to a simple system for connecting modules. You can choose which part of the system to print and install on your printer, and if you do not like something, you can always fix it.
It's a mount and cooling system base module for e3d chimera dual extruder Tevo Tornado/Creality CR-10/Ender-3 upgrade. If you want to use it on your printer, you will need to buy and assemble e3d chimera extruder and print cooling modules for K3D modular cooling system:
5015 fan cooling module: https://www.thingiverse.com/thing:2938019
40mm fan cooling module: https://www.thingiverse.com/thing:2938032
You may also need BLTouch mount module:
https://www.thingiverse.com/thing:2938059
Advantages:
Modular design allows you to easily change the configuration when you want it
Cooling modules are designed in such a way that the air flow is directed only to the zone requiring cooling.
No glue is required for assembly
All modules are interchangeable
The rails can be printed horizontally
If you design your module with the same rails, it will fit into the system
If you design a base module with the same rail position relative to the extruder nozzle, then all modules will fit into it and will work.
K3D Modular cooling system was created to replace all the others. It gives unlimited possibilities for expansion due to a simple system for connecting modules. You can choose which part of the system to print and install on your printer, and if you do not like something, you can always fix it.