Thingiverse
Tevo Tarantula semi open cable drag chain by DaVinci2000
by Thingiverse
Last crawled date: 4 years, 2 months ago
Here's my design for cable drag chain for Tevo Tarantula based on my semi open drag chain: https://www.thingiverse.com/thing:2999958
It does not require disassembly / unscrewing of the cables.
It requires 15 links, which could be printed all-in-one or separately.
The end for bed connector allows unplugging.
The end for rail can be screwed from the top or side of the rail with spare T-nut and 10 mm hex screw.
Here's the chain in action: https://www.youtube.com/watch?v=HF8_3mJsSMU
Check out my other designs:https://www.thingiverse.com/DaVinci2000/designs
It does not require disassembly / unscrewing of the cables.
It requires 15 links, which could be printed all-in-one or separately.
The end for bed connector allows unplugging.
The end for rail can be screwed from the top or side of the rail with spare T-nut and 10 mm hex screw.
Here's the chain in action: https://www.youtube.com/watch?v=HF8_3mJsSMU
Check out my other designs:https://www.thingiverse.com/DaVinci2000/designs