Thingiverse
Tevo Tarantula Magnetic X carriage - OEM style by ndupont
by Thingiverse
Last crawled date: 4 years, 7 months ago
Tevo Tarantula Magnetic X carriage - OEM style with/without BLTouch support on the back.
Remixed from the excellent https://www.thingiverse.com/thing:1829779 by Banholm, and the OEM carriage by bitbrain https://www.thingiverse.com/thing:2104509
This in order to keep the original width, and original belt attachement slits as I like the belt parallel to the axis.
A BLTouch spacer is provided, it has to be resizes it in height to suit your need. A magnetic BLTouch attachement with a specific spacer for each hotend will be designed.
NEW a dual version with a large (89mm) space between the nozzles for duplication mode
Print in ABS with a 30% infill. I've used infill meshes to strenghen the belt slits (see prictures).
No support is required but if your Tarantula is not enclosed, add a draft shield and a brim.
Remixed from the excellent https://www.thingiverse.com/thing:1829779 by Banholm, and the OEM carriage by bitbrain https://www.thingiverse.com/thing:2104509
This in order to keep the original width, and original belt attachement slits as I like the belt parallel to the axis.
A BLTouch spacer is provided, it has to be resizes it in height to suit your need. A magnetic BLTouch attachement with a specific spacer for each hotend will be designed.
NEW a dual version with a large (89mm) space between the nozzles for duplication mode
Print in ABS with a 30% infill. I've used infill meshes to strenghen the belt slits (see prictures).
No support is required but if your Tarantula is not enclosed, add a draft shield and a brim.