Tevo Tarantula camera mount for Raspberry Pi by ndupont

Last crawled date: 3 years, 1 month ago

RaspberryPi camera mount for the vertical beams of the Tevo Tarantulla.
It could actually fit any printer with an openbuild frame (2020 or 2040 aluminium extusion).
The STL file is designed for the right hand side, and could be mirrored to be used on the left.
Using a Pi Zero W, it can be attached with zip ties, below or above the beam.
You can find the camera enclosure in the original Thing : https://www.thingiverse.com/thing:1646474
new : now with an over-the-top dual extrusion version
Cura offsets for the insert are : X=0.3mm, Y=0.4mm, Z=0
new : now with a matching dual extrusion camera enclosure
Cura offsets for the insert are : X=0mm, Y=-3.45mm, Z:0
Time lapse (dual extrusion) : https://www.youtube.com/watch?v=fVJ0YVWmsSM
and here is the print of the single extrusion : https://www.youtube.com/watch?v=x_q40KS8nuU