Thingiverse
TEVO Black Widow Y-Carriage MGN12 Conversion by iggut
by Thingiverse
Last crawled date: 4 years, 1 month ago
https://youtu.be/yf8EObWTr1k
You will need two MGN12 Rails. I used 450mm ones and they cover the whole bed movement area. You should be able to use other lengths...Just make sure your bed does not come off the rails.
MGN12 x 2
M3 Bolts and T-nuts as needed to install. (Will update with exact quantities when done).
Attach the MGN12 rails to the printed plate
Attach the bolt bracket to the printed plate the same way as you did with stock. YOU WILL NEED SPACERS (I will include a printable one soon)
Using below alignment tools place the two rails and plate on your 4080 C-beam and bolt the whole thing down
Make sure your belt is tight and parallel to the 4080
Attach the Stock Y carriage to the plate using the now empty wheel holes
I used https://www.thingiverse.com/thing:2368837 to align the rails. Thanks to @theinternal
You will need two MGN12 Rails. I used 450mm ones and they cover the whole bed movement area. You should be able to use other lengths...Just make sure your bed does not come off the rails.
MGN12 x 2
M3 Bolts and T-nuts as needed to install. (Will update with exact quantities when done).
Attach the MGN12 rails to the printed plate
Attach the bolt bracket to the printed plate the same way as you did with stock. YOU WILL NEED SPACERS (I will include a printable one soon)
Using below alignment tools place the two rails and plate on your 4080 C-beam and bolt the whole thing down
Make sure your belt is tight and parallel to the 4080
Attach the Stock Y carriage to the plate using the now empty wheel holes
I used https://www.thingiverse.com/thing:2368837 to align the rails. Thanks to @theinternal