Thingiverse
![terraPin ACME 6X6 (6x9, 6X4.5) Pinhole Cameras - 120 film by schlem](/previews/8807121.jpg)
terraPin ACME 6X6 (6x9, 6X4.5) Pinhole Cameras - 120 film by schlem
by Thingiverse
Last crawled date: 3 years, 1 month ago
The terraPin ACME pinhole camera is the culmination of years of 3D printing and camera design work. This camera is assembled WITHOUT ANY FASTENERS, using sliding joinery. With the exception of the pinhole (which is easy to make), all parts can be 3D printed.
NEW
A "Better Cap Plate" for the ACME has been uploaded. I have added a snap clip to the sliding parts that eliminates the need for an arched clip to hold the cap together. As before, you will need to remove the support under the rectangular insert, where the winders fit. Also "Snap Slider" caps have been added for the ACE and CAMEO.
The terraPin ACME uses medium format 120 film, which is widely available at photography supply shops and on the internet (Amazon, Lomography, eBay, etc). The format is a square 6X6 frame (12 per roll of film), and the photos produced have a classic wide-angle pinhole look with peripheral vignetting (darker corners, brighter center).
Pinhole Diameter: 0.22 mm
"Focal Length": 25.4 mm
F-Number: f/135
I archive all photos I shoot with this camera on Flickr.
Also included in the downloads is the ACE (f/135), a smaller 6X4.5 version that shoots a rectangular frame and makes 16 exposures per roll of film. A new 6X9 version, called the CAMEO, has also been included. The CAMEO will have extreme vignetting due to the short "focal length" and wide frame. Shoot the CAMEO at f/165, like the MUTO or terraPin 6*6. See MUTO for examples of this vignetting. Exposure calculations available in Thing Files.
See terraPin High-Strength Winder (1/4" shaft) for additional winder/knob options!
Hey! Read This!
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
You are free to:Share — copy and redistribute the material in any medium or formatAdapt — remix, transform, and build upon the material
for any purpose, even commercially.
Under the following terms:Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
NEW
A "Better Cap Plate" for the ACME has been uploaded. I have added a snap clip to the sliding parts that eliminates the need for an arched clip to hold the cap together. As before, you will need to remove the support under the rectangular insert, where the winders fit. Also "Snap Slider" caps have been added for the ACE and CAMEO.
The terraPin ACME uses medium format 120 film, which is widely available at photography supply shops and on the internet (Amazon, Lomography, eBay, etc). The format is a square 6X6 frame (12 per roll of film), and the photos produced have a classic wide-angle pinhole look with peripheral vignetting (darker corners, brighter center).
Pinhole Diameter: 0.22 mm
"Focal Length": 25.4 mm
F-Number: f/135
I archive all photos I shoot with this camera on Flickr.
Also included in the downloads is the ACE (f/135), a smaller 6X4.5 version that shoots a rectangular frame and makes 16 exposures per roll of film. A new 6X9 version, called the CAMEO, has also been included. The CAMEO will have extreme vignetting due to the short "focal length" and wide frame. Shoot the CAMEO at f/165, like the MUTO or terraPin 6*6. See MUTO for examples of this vignetting. Exposure calculations available in Thing Files.
See terraPin High-Strength Winder (1/4" shaft) for additional winder/knob options!
Hey! Read This!
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
You are free to:Share — copy and redistribute the material in any medium or formatAdapt — remix, transform, and build upon the material
for any purpose, even commercially.
Under the following terms:Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
Similar models
thingiverse
free
![terraPin Prime 6X6 Pinhole Camera -120 Film by schlem](/t/8868538.jpg)
terraPin Prime 6X6 Pinhole Camera -120 Film by schlem
... unless specifically available for download this notice constitutes a clarification, not a change, to licensing for this design.
thingiverse
free
![terraPin Bijou 6 x 4.5 Pinhole Camera by schlem](/t/8936416.jpg)
terraPin Bijou 6 x 4.5 Pinhole Camera by schlem
... unless specifically available for download this notice constitutes a clarification, not a change, to licensing for this design.
thingiverse
free
![terraPin 6X6 "DX18" - 18mm Pinhole Camera Extension by schlem](/t/8897879.jpg)
terraPin 6X6 "DX18" - 18mm Pinhole Camera Extension by schlem
... unless specifically available for download this notice constitutes a clarification, not a change, to licensing for this design.
thingiverse
free
![terraPin 6X6 "Incher" 25.4 mm Pinhole Camera Extension by schlem](/t/8897836.jpg)
terraPin 6X6 "Incher" 25.4 mm Pinhole Camera Extension by schlem
... unless specifically available for download this notice constitutes a clarification, not a change, to licensing for this design.
thingiverse
free
![terraPin Bijou Sidewinder 6X4.5 Pinhole Camera by schlem](/t/8880709.jpg)
terraPin Bijou Sidewinder 6X4.5 Pinhole Camera by schlem
... unless specifically available for download this notice constitutes a clarification, not a change, to licensing for this design.
thingiverse
free
![terraPin Bijou "Incher" - 25.4mm Pinhole Camera Extension by schlem](/t/8916724.jpg)
terraPin Bijou "Incher" - 25.4mm Pinhole Camera Extension by schlem
... unless specifically available for download this notice constitutes a clarification, not a change, to licensing for this design.
thingiverse
free
![terraPin 6X9 120 film Pinhole Camera by schlem](/t/8958319.jpg)
terraPin 6X9 120 film Pinhole Camera by schlem
... unless specifically available for download this notice constitutes a clarification, not a change, to licensing for this design.
thingiverse
free
![terraPin ACE Pinhole Camera, Lulzbot Edition by schlem](/t/8625060.jpg)
terraPin ACE Pinhole Camera, Lulzbot Edition by schlem
... you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
thingiverse
free
![P5 MUTO Wide Angle 4X5 Pinhole Camera by schlem](/t/8842063.jpg)
P5 MUTO Wide Angle 4X5 Pinhole Camera by schlem
... unless specifically available for download this notice constitutes a clarification, not a change, to licensing for this design.
thingiverse
free
![terraPin, a 120 Film Pinhole Photography System by schlem](/t/8969852.jpg)
terraPin, a 120 Film Pinhole Photography System by schlem
... unless specifically available for download this notice constitutes a clarification, not a change, to licensing for this design.
Terrapin
archive3d
free
![Car 3D Model](/t/1082715.jpg)
Car 3D Model
...car 3d model archive3d car terrapin amphibian car swim n220711 - 3d model (*.gsm+*.3ds) for...
thingiverse
free
![Terrapin X covers](/t/4730183.jpg)
Terrapin X covers
...terrapin x covers
thingiverse
terrapin lens cover front and rear v.01
thingiverse
free
![Terrapin Test object by scharkalvin](/t/8966986.jpg)
Terrapin Test object by scharkalvin
...m) to determine if your printer has the precision required to print the terrapin camera (http://www.thingiverse.com/thing:495230)
thingiverse
free
![Aquarium terrapin terrarium by Josephskynet](/t/8276146.jpg)
Aquarium terrapin terrarium by Josephskynet
...aquarium terrapin terrarium by josephskynet
thingiverse
a little thing i made for my friends turtles
thingiverse
free
![terrapin gamera top cap with 10mm level hole by dwnickerson](/t/9684418.jpg)
terrapin gamera top cap with 10mm level hole by dwnickerson
...terrapin gamera top cap with 10mm level hole by dwnickerson
thingiverse
redesign of lid for terrapin kaiju gamera
thingiverse
free
![Star Citizen Anvil Terrapin by Furysend](/t/8686955.jpg)
Star Citizen Anvil Terrapin by Furysend
...y of weapons intended to keep the most fearsome vanduul raider at bay.
uses 8mm x 3mm and 8mm x 1mm magnets to connect the parts.
thingiverse
free
![Terrapin ACME with blind tripod thread by Capelare](/t/8561190.jpg)
Terrapin ACME with blind tripod thread by Capelare
...hreaded tripod mount blind so light cannot enter through it.
check the original thing for instructions and the rest of the parts.
thingiverse
free
![Hot shoe for example terraPin Kaiju 6x18 Pinhole Gamera by Volund](/t/8703107.jpg)
Hot shoe for example terraPin Kaiju 6x18 Pinhole Gamera by Volund
...glue on for instance terrapin kaiju 6x18 pinhole camera. for use with bubble spirit levelhttps://www.thingiverse.com/thing:876457
thingiverse
free
![terraPin Stawp Gap by schlem](/t/8940718.jpg)
terraPin Stawp Gap by schlem
... unless specifically available for download this notice constitutes a clarification, not a change, to licensing for this design.
thingiverse
free
![terraPin Bijou 6 x 4.5 Pinhole Camera by schlem](/t/8936416.jpg)
terraPin Bijou 6 x 4.5 Pinhole Camera by schlem
... unless specifically available for download this notice constitutes a clarification, not a change, to licensing for this design.
Schlem
thingiverse
free
![Tweezees by schlem](/t/9040184.jpg)
Tweezees by schlem
...tweezees by schlem
thingiverse
use 'em as chopsticks, use 'em as tongs. with springy action!
thingiverse
free
![Simple Demitasse by schlem](/t/9045211.jpg)
Simple Demitasse by schlem
...tasse by schlem
thingiverse
this thing was made with tinkercad.
you can order one here: http://www.shapeways.com/shops/bitforge
thingiverse
free
![Flywatter Hanger by schlem](/t/9038671.jpg)
Flywatter Hanger by schlem
...tter by geir ( http://www.thingiverse.com/thing:9518 ), but wanted a way to hang it up. hole for dowel is 7mm, like thing # 9518
thingiverse
free
![Dorba iPhone4 Case by schlem](/t/9043901.jpg)
Dorba iPhone4 Case by schlem
...se
this thing was made with tinkercad.
for more information on the rare and elusive dorba bear, go here: schlem.deviantart.com/
thingiverse
free
![ACME AMERICAN WROUGHT ANVIL by schlem](/t/8797492.jpg)
ACME AMERICAN WROUGHT ANVIL by schlem
...acme american wrought anvil by schlem
thingiverse
“quality is our #1 dream”
anvils in warner bros cartoons
thingiverse
free
![Sake / Shot Glass by schlem](/t/9044017.jpg)
Sake / Shot Glass by schlem
...ith tinkercad.
an elegant shot glass to catch the crema. no cumbersome handles to get in the way of symmetry or clumsy fingers.
thingiverse
free
![Dorba Head by schlem](/t/9045060.jpg)
Dorba Head by schlem
...ar, go here: schlem.deviantart.com/ check out my shop on shapeways to get a 3d print of this object: shapeways.com/shops/bitforge
thingiverse
free
![Space Pinhole Photographer by schlem](/t/8772783.jpg)
Space Pinhole Photographer by schlem
... conflict, the quiet photographer uses simple tools and photochemical processes to capture the beauty of the cold harsh universe.
thingiverse
free
![Double-Shot Espresso by schlem](/t/9044016.jpg)
Double-Shot Espresso by schlem
... was made with tinkercad.
extra-wide shot glass to catch both spouts of your portafilter. with a dainty handle. mmmmmm- coffee
thingiverse
free
![Wiring Loom Clip by schlem](/t/9037634.jpg)
Wiring Loom Clip by schlem
...hingiverse
designed in tinkercad, to fit 6mm ply, like printrbot. keeps your wiring firmly secured, designed for 15 mm looming.
6X9
3d_export
$19
![Exhibition booth area 6X9 3DMAX2009 3D Model](/t/129393.jpg)
Exhibition booth area 6X9 3DMAX2009 3D Model
...po stall exhibit display template 3d models booth design booth
exhibition booth area 6x9 3dmax2009 3d model xiaoq2 90420 3dexport
3d_export
$19
![Exhibition booth area 6X9 3DMAX2009 3D Model](/t/135486.jpg)
Exhibition booth area 6X9 3DMAX2009 3D Model
...po stall exhibit display template 3d models booth design booth
exhibition booth area 6x9 3dmax2009 3d model xiaoq2 90421 3dexport
3d_export
$60
![nottingham university exhibition 6x9 booth](/t/11927807.jpg)
nottingham university exhibition 6x9 booth
...lt;br>- obj (multi format)<br>- fbx (multi format)<br>- light with ies<br>poly 365683<br>verts 231755
thingiverse
free
![6x9 Speaker Adapter by thewatchmakerfl](/t/8745150.jpg)
6x9 Speaker Adapter by thewatchmakerfl
...r adapter to put 6.5 inch speakers in 6x9 inch holes. print one per speaker. use 2 of the old holes and brace the third with this
thingiverse
free
![Speaker Adapters 6x9 to 165mm by SilverMoon](/t/8771470.jpg)
Speaker Adapters 6x9 to 165mm by SilverMoon
...pters 6x9 to 165mm by silvermoon
thingiverse
adapter from 6x9 inches to 165 mm speakers (specific size for the model ad w600neo)
thingiverse
free
![Durst Trineg 138 6x9 by Volund](/t/8653235.jpg)
Durst Trineg 138 6x9 by Volund
...g 138 6x9 by volund
thingiverse
made a new insert to durst trineg negative holder to handle 6x9 format without the defalt glass.
thingiverse
free
![6x9 Speaker Spacer by jonbourg](/t/8008862.jpg)
6x9 Speaker Spacer by jonbourg
...eful!
the openscad file is also included to customize this for your needs (for example; adding external adapter mount points).
thingiverse
free
![6x9 Graflok Back for 4x5 Camera by BHuij](/t/8060117.jpg)
6x9 Graflok Back for 4x5 Camera by BHuij
... other stls are the same as the 6x12 version.
see ekech's thing #2894651 for a full bill of materials and build instructions.
unity_asset_store
$5
![Russian combat knife 6X9-1](/t/5085128.jpg)
Russian combat knife 6X9-1
...h the russian combat knife 6x9-1 asset from andrey surnachev. find this & other weapons options on the unity asset store.
thingiverse
free
![Heat bed 8x10 glass to 6x9 heat bed by hobbit1968](/t/8977219.jpg)
Heat bed 8x10 glass to 6x9 heat bed by hobbit1968
...heat bed 8x10 glass to 6x9 heat bed by hobbit1968
thingiverse
heat bed, 8x10 glass to 6x9 heat bed.
Pinhole
turbosquid
free
![Pinhole Glasses](/t/13345270.jpg)
Pinhole Glasses
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
thingiverse
free
![Pinhole Camera by StarScape](/t/8270500.jpg)
Pinhole Camera by StarScape
...pinhole camera by starscape
thingiverse
pinhole camera
thingiverse
free
![Pinhole Camera by asoberon](/t/8937545.jpg)
Pinhole Camera by asoberon
...pinhole camera by asoberon
thingiverse
a pinhole camera.
thingiverse
free
![Pinhole Glasses by amitkalia](/t/8051859.jpg)
Pinhole Glasses by amitkalia
...pinhole glasses by amitkalia
thingiverse
pinhole glasseshttps://en.wikipedia.org/wiki/pinhole_glasses
thingiverse
free
![Pinhole Eclipse Viewer by ThunderClan](/t/8039366.jpg)
Pinhole Eclipse Viewer by ThunderClan
...pinhole eclipse viewer by thunderclan
thingiverse
this is a pinhole viewer for the sun.
thingiverse
free
![Top pinhole cofee by Vanson](/t/8841153.jpg)
Top pinhole cofee by Vanson
...erse.com/thing:1486588
viewfinder for the pinhole cofee : http://www.thingiverse.com/thing:1500169
diameter box of coffee : 85 mm
thingiverse
free
![Simple Pinhole Projector by kattanasio](/t/8667406.jpg)
Simple Pinhole Projector by kattanasio
...simple pinhole projector by kattanasio
thingiverse
very simple pinhole projector for the solar eclipse.
thingiverse
free
![Viewfinder Pinhole sténopé by Vanson](/t/8841562.jpg)
Viewfinder Pinhole sténopé by Vanson
...574
pinhole cofee mount for vanguard : http://www.thingiverse.com/thing:1486588
diameter box of coffee : 85 mm
31/0/2018 : add v2
thingiverse
free
![Pinhole camera, Sténopé by Pradaldi](/t/8911827.jpg)
Pinhole camera, Sténopé by Pradaldi
...pinhole camera, sténopé by pradaldi
thingiverse
simple design for a pinhole camera.
un sténopé tout simple.
thingiverse
free
![pinhole cofee mount for vanguard by Vanson](/t/8843168.jpg)
pinhole cofee mount for vanguard by Vanson
...verse.com/thing:245574
viewfinder for the pinhole cofee : http://www.thingiverse.com/thing:1500169
diameter box of coffee : 85 mm
6X4
turbosquid
$79
![Kamaz Modify 6x4](/t/13421864.jpg)
Kamaz Modify 6x4
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
![6x4 Oval engagement ring](/t/13244039.jpg)
6x4 Oval engagement ring
...d model 6x4 oval engagement ring for download as obj and stl on turbosquid: 3d models for games, architecture, videos. (1517937)
turbosquid
$79
![Kamaz Modify 6x4 MBR](/t/13421866.jpg)
Kamaz Modify 6x4 MBR
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$79
![Kamaz Modify 6x4 KZ](/t/13421867.jpg)
Kamaz Modify 6x4 KZ
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$79
![Kamaz Modify 6x4 Army M3](/t/13421862.jpg)
Kamaz Modify 6x4 Army M3
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$79
![Kamaz Modify 6x4 Army M1](/t/13421863.jpg)
Kamaz Modify 6x4 Army M1
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$129
![truck tractor 6x4](/t/13086065.jpg)
truck tractor 6x4
...ery format<br>- textures formats: jpeg<br>- materials, textures, objects have the correct names<br>(83 objects)
3d_export
$169
![truck r 6x4 with trailer](/t/13086056.jpg)
truck r 6x4 with trailer
...luded and mapped in every format<br>- textures formats: jpeg<br>- materials, textures, objects have the correct names
cg_studio
$145
![Mercedes Benz Actros 6X43d model](/t/675993.jpg)
Mercedes Benz Actros 6X43d model
...d model
cgstudio
.max .obj - mercedes benz actros 6x4 3d model, royalty free license available, instant download after purchase.
3d_export
$95
![sd kfz 232](/t/11938206.jpg)
sd kfz 232
...6 rad (6 wheel) versions were based on a 6x4 truck with an armoured body, but by 1937 they...
Acme
turbosquid
$29
![acme earthquake pills](/t/13482502.jpg)
acme earthquake pills
... acme earthquake pills for download as 3ds, obj, c4d, and fbx on turbosquid: 3d models for games, architecture, videos. (1173449)
3d_export
$10
![Web camera Acme 3D Model](/t/301476.jpg)
Web camera Acme 3D Model
...web camera acme 3d model
3dexport
web camera acme 3d model art-v 21974 3dexport
turbosquid
$29
![Acme Furniture model Hallie](/t/13365408.jpg)
Acme Furniture model Hallie
...free 3d model acme furniture model hallie for download as max on turbosquid: 3d models for games, architecture, videos. (1365308)
3d_export
$5
![acme hamilton chair](/t/11504180.jpg)
acme hamilton chair
...es a swivel feature as well as height and tilt adjustment. smooth-rolling wheels on the bottom help you move it around with ease.
turbosquid
$7
![ACME Bage End Table. IKEA GLADOM](/t/13378462.jpg)
ACME Bage End Table. IKEA GLADOM
...3d model acme bage end table. ikea gladom for download as obj on turbosquid: 3d models for games, architecture, videos. (1666181)
turbosquid
$37
![Acme Genesis Ms 25 PBR Version](/t/13495683.jpg)
Acme Genesis Ms 25 PBR Version
...e genesis ms 25 pbr version for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1155489)
turbosquid
$37
![Acme Genesis Ms 25 Vray Version](/t/13495684.jpg)
Acme Genesis Ms 25 Vray Version
... genesis ms 25 vray version for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1155433)
turbosquid
$25
![Dietz Acme Inspector Kerosene Lamp 1923](/t/13479832.jpg)
Dietz Acme Inspector Kerosene Lamp 1923
...erosene lamp 1923 for download as 3ds, obj, fbx, 3dm, and dwg on turbosquid: 3d models for games, architecture, videos. (1442774)
archive3d
free
![Sofa 3D Model](/t/1078682.jpg)
Sofa 3D Model
...sofa 3d model archive3d couch sofa settee sofa acme furniture n271210 - 3d model (*.3ds) for interior 3d...
3d_export
$10
![lacole serving cart](/t/11402699.jpg)
lacole serving cart
...2021.12.28 viruses: clean, tested by prunescene! preview: yes tags: acme furniture, lacole, serving, cart, тележка, сервис, для ресторана, стекло,...
6X6
turbosquid
$65
![Chassis 6x6](/t/13467520.jpg)
Chassis 6x6
...free 3d model chassis 6x6 for download as ige, obj, and sldas on turbosquid: 3d models for games, architecture, videos. (1252844)
3d_export
$6
![trass stand 6x6](/t/13106897.jpg)
trass stand 6x6
...trass stand 6x6
3dexport
3d_export
$6
![6x6 exhibition booth stand](/t/13090928.jpg)
6x6 exhibition booth stand
...6x6 exhibition booth stand
3dexport
6x6 exhibition booth stand 3d model
turbosquid
$90
![Guarani 6x6 VBTP](/t/13368921.jpg)
Guarani 6x6 VBTP
...d
royalty free 3d model guarani 6x6 vbtp for download as max on turbosquid: 3d models for games, architecture, videos. (1551166)
3d_export
$100
![Pinzgauer 718 6x6 3D Model](/t/131949.jpg)
Pinzgauer 718 6x6 3D Model
...pinzgauer 718 6x6 3d model
3dexport
pinzgauer 718 6x6 steyr puch
pinzgauer 718 6x6 3d model dougmavs 75686 3dexport
3d_export
$15
![6x6 Exhibition 3D Model](/t/33882.jpg)
6x6 Exhibition 3D Model
...d exhibition convention exhibit modern contemporary kiosk stall model stalls space
6x6 exhibition 3d model anyting 35251 3dexport
turbosquid
$100
![KTO Rossomak 6x6 Camuflag](/t/13472430.jpg)
KTO Rossomak 6x6 Camuflag
... rossomak 6x6 camuflag for download as max, fbx, 3ds, and obj on turbosquid: 3d models for games, architecture, videos. (1606596)
3d_export
$5
![IFA L60 6x6 3D Model](/t/855850.jpg)
IFA L60 6x6 3D Model
...uck trucks transport 6x6 4x4
ifa l60 6x6 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl ccszvnoel1 109124 3dexport
turbosquid
$39
![Faun L908 6x6 1958](/t/13505103.jpg)
Faun L908 6x6 1958
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$6
![6x6 Exhibition booth stand](/t/13429984.jpg)
6x6 Exhibition booth stand
...n booth stand 3d model for download as 3ds, max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1437151)
120
3ddd
$1
![Life 120-120-50](/t/797981.jpg)
Life 120-120-50
... журнальный , круглый
автор модели: aeroslon
design_connected
$13
![XZ3 120](/t/4571452.jpg)
XZ3 120
...xz3 120
designconnected
magis xz3 120 computer generated 3d model. designed by van onck, andries & hiroko.
3ddd
$1
![diamond so 120](/t/977337.jpg)
diamond so 120
...diamond so 120
3ddd
diamond , morosini
люстра diamond so 120
turbosquid
$10
![Table 120](/t/13499066.jpg)
Table 120
...lty free 3d model table 120 for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1503795)
turbosquid
$6
![Lamp 120](/t/13513537.jpg)
Lamp 120
...alty free 3d model lamp 120 for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1500749)
turbosquid
$15
![Curtain 120](/t/13506718.jpg)
Curtain 120
...e 3d model curtain 120 for download as max, max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1618083)
3ddd
$1
![Bench 120](/t/973920.jpg)
Bench 120
...bench 120
3ddd
скамья
bench for two.
turbosquid
$20
![Landscape 120](/t/13509480.jpg)
Landscape 120
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$9
![Office 120](/t/13388338.jpg)
Office 120
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
free
![kerasan Bentley 120](/t/122513.jpg)
kerasan Bentley 120
... цветок , полотенце
комплект kerasan bentley 120
Cameras
archibase_planet
free
![Camera](/t/946527.jpg)
Camera
...base planet
camera surveillance camera video camera
camera surveillance n090211 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
![Camera](/t/949935.jpg)
Camera
...hibase planet
camera security camera video camera
camera security n210515 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
![Camera](/t/946534.jpg)
Camera
...se planet
camera web camera webcam
camera butterfly usb pc camera n090713 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Camera](/t/946845.jpg)
Camera
...mera
archibase planet
surveillance camera video camera camcorder
camera n011211 - 3d model (*.3ds) for exterior 3d visualization.
archibase_planet
free
![Camera](/t/946530.jpg)
Camera
...camera
archibase planet
camera digital camera
camera canon digital n041211 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
![Camera](/t/946533.jpg)
Camera
...camera
archibase planet
camera film camera phototechnique
camera n100214 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Camera](/t/951924.jpg)
Camera
...amera
archibase planet
camera video camera camcorder
camera video n070315 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Camera](/t/946846.jpg)
Camera
...rchibase planet
camera video camera camcorder
camera studio n101213 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
archibase_planet
free
![Camera](/t/946528.jpg)
Camera
...ibase planet
digital camera camera phototechnique
camera canon ixus 400 n310311 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
![Camera](/t/946526.jpg)
Camera
...ase planet
photocamera video camera camera
camera sony t300 black n291010 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
Film
3d_export
$65
![filming](/t/11921585.jpg)
filming
...filming
3dexport
simple rendering of the scene file
design_connected
$16
![Oka Film](/t/4570503.jpg)
Oka Film
...oka film
designconnected
nkuku oka film computer generated 3d model.
turbosquid
$80
![Film Actress2](/t/13309543.jpg)
Film Actress2
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$30
![Film Reel](/t/13365974.jpg)
Film Reel
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
![Film Projector](/t/13370805.jpg)
Film Projector
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$8
![Film Strip](/t/13355620.jpg)
Film Strip
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
![Film clapper](/t/13236093.jpg)
Film clapper
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$8
![Photographic Film](/t/584160.jpg)
Photographic Film
...n texture
- realistic highly detailed and animation ready photographic film - adjustable photographic tape (by curve) - textured
turbosquid
$4
![film reel](/t/13289734.jpg)
film reel
...rbosquid
royalty free 3d model film reel for download as c4d on turbosquid: 3d models for games, architecture, videos. (1212542)
3d_export
$65
![film base](/t/12191741.jpg)
film base
...film base
3dexport
simple rendering of the scene file
5
turbosquid
$6
![Rock 5-5](/t/13489585.jpg)
Rock 5-5
...urbosquid
royalty free 3d model rock 5-5 for download as obj on turbosquid: 3d models for games, architecture, videos. (1639063)
3d_export
$5
![hinge 5](/t/11920337.jpg)
hinge 5
...hinge 5
3dexport
hinge 5
turbosquid
$10
![A-5](/t/13295733.jpg)
A-5
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
![A-5](/t/13255822.jpg)
A-5
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$12
![Calligraphic Digit 5 Number 5](/t/13397640.jpg)
Calligraphic Digit 5 Number 5
...hic digit 5 number 5 for download as max, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1389333)
3ddd
$1
![5 роз](/t/618689.jpg)
5 роз
...5 роз
3ddd
5 роз в стеклянной вазе
design_connected
$11
![iPhone 5](/t/4569406.jpg)
iPhone 5
...iphone 5
designconnected
apple iphone 5 computer generated 3d model.
3ddd
$1
![Lola 5](/t/846327.jpg)
Lola 5
...lola 5
3ddd
miniforms
lola 5 miniforms 300*65*134
3ddd
$1
![Nexus 5](/t/702537.jpg)
Nexus 5
...dd
nexus , phone , телефон
google nexus 5 phone
3d_ocean
$15
![iPhone 5](/t/953927.jpg)
iPhone 5
...iphone 5
3docean
3d 4d apple cinema iphone model modeling phone screen texture
iphone 5 3d model and texture realistic iphone 5.