Terraforming Mars - Player Mat Overlay by aimfeld

Last crawled date: 3 years ago

Yet another Terraforming Mars player mat overlay...
Features
Custom grid insets to hold production cubes
Additional spaces for production cubes (20 and 30)
Edges for sticking photo corners to hold original player mat in place
Note
This player mat overlay is designed for cubes w/ side length around 8.33mm (+/- some tolerance). I had reports of cubes being bigger and not fitting the grids. Make sure to measure your cubes or print a grid first to test the fit before printing the whole thing.
Choices
Choose a body:
Standard body
Body variation w/o wall between energy and heat
Choose grids (Note: Grids are compatible with either body):
Standard grids (big & small) for original production sheet (10/20/30 in separate column on the right)
Uniform grids (big & small) for alternative production sheet (ascending numbers w/ 10/20/30 at the end). Note: In case your printer's tolerance requires some fine-tuning, you can use the customizer to modify the allowance and chamfers of the uniform grids
Instructions
3D print the body, one big grid and 5 small grids
2D print the production sheet pdf (w/o scaling) and cut along the markers (or feel free to design your own)
Put the cut pieces of paper into the recesses and press the grids on top (Note: The grids have a chamfer. Make sure the chamfer is oriented downwards)
Optional: Put photo corners on the edges (backside of body) to hold the original player mat in place
Edits
2018-07-08: Added a variation of the body w/o wall between energy and heat resources
2018-08-02: Added a variation of the grids with uniform spacing and a production inset for use with the new grids with numbers in ascending order (10/20/30 at the end). Attached a picture showing the (uniform) grid dimensions as well.
2018-08-13: Allowed for the uniform grids to be customized to fine-tune the fit (depending on your printer's tolerance)