Termostat by Progspont

...esp-01 relay module grabcad there is cad model of esp-01 relay module

...esp relay modul grabcad esp8266 relais mit esp8266 serielles wifi-transceiver-modul esp-01s

...y engineers_alter_ego thingiverse this case was designed for esp-01s relay v4.0. the case include 2 mounting holes for m3 bolts.

... module case by fanlou thingiverse a small case for esp 01 s relay module. all fits with friction (no screws, no glue required).

...box for relay unit esp-01s by fivezero thingiverse pla

...o it. printing: esp-01 relay lid , 100% infill needed, no supports. esp-01 relay box , 25% infill , supports for the cable holes.

...ak in corner in case pins need to be connected via wires, etc. clearing in wall for wiring mounting pads for fixing to structures

...double relay box with esp 8266 thingiverse a box to accommodate a double relay module and an esp 8266.

...tion is simple. the drills are for 2mm diameter screws. i have designed a small wiring support to give the whole more confidence.

...esp relay x2 grabcad esp_32 with two relay

...- units: mm.<br>clean polygonal grid.<br>collection have:<br>1. bathtub<br>2. shower with termostat mixer<br>3. glass bottle for liquds<br>4. deodorantholder<br>5. glass with holder...

...bosch rde100.1 bh termostat by fa_su_me thingiverse

... thingiverse case for thermostat w3231. thermostat for embedding in the front panel. but i made the body, for fastening outside.

...zzle: 0.4mm support: touch bed material's 4x allen screws or wood screws 3mm x 20mm recommendation printing with scale 1.005%

...the nest so i put 12 in and incubator they should all hatch about the same time i will post some photos when the hatch in 21 days

...ordo per valvola termostatica ( thermostatic valve connector) by filippomenzio thingiverse connector to mount termostatic valve.

... with 0.05 layer height (try the thickest you have) and the pin with 0.1 layer height, both with a 0.4mm nozzle and 100% filling.

...another modified version to strengthen the pisa on the termostat and easier handling. there is a tab to press...

...sp3swj thingiverse made from food dryer with timer and termostat :-) https://www.youtube.com/watch?v=2bd4kvmp-8o temperature 35..70 celcius and time 0,5...19 hour....