Thingiverse
Tena testa Case by Grlind
by Thingiverse
Last crawled date: 3 years ago
This is a case I did for a simple project that is used to test your antenna. The kit can be found here https://sites.google.com/site/zl1cvd/tenatesta
The case is wider than the actual Tena Testa to allow the Tena Testa to be tilted to get the 3 buttons into the case. The case will need a piece of non conductive foam to secure the Tena Testa moving around. Put this between the case cover or back and then Tena Testa PWB. I made it a little extra deep to account for standoff screws. I would use at least 1 standoff on the Tena Testa PWB opposite of the LCD connector. This help support but I did not add a screw to the standoff on the LCD.
The case is wider than the actual Tena Testa to allow the Tena Testa to be tilted to get the 3 buttons into the case. The case will need a piece of non conductive foam to secure the Tena Testa moving around. Put this between the case cover or back and then Tena Testa PWB. I made it a little extra deep to account for standoff screws. I would use at least 1 standoff on the Tena Testa PWB opposite of the LCD connector. This help support but I did not add a screw to the standoff on the LCD.
Similar models
thingiverse
free
Lcd case by starmind
...what i came up with. i did see a similar design and i used it as a template to...
thingiverse
free
Ender 5 Plus SKR Turbo 1.4 Standoff/Mount by davidkobey
...flush with the heater control mosfet and leaves margin on the side for usb cable.
requires - the 4 original screws + 4 m4 screws.
thingiverse
free
Discipad high profile case by lipsticklatitude
...s. i used 10mm standoffs for the pictured build. the case sits flat. i added rubber feet (https://amzn.to/3l9wxsg) to add a tilt.
thingiverse
free
Ender 5 Back Cover + Pi Case by bloocool
... in and hidden from the front view.
materials used standoff screws (be sure to install standoffs before screwing into the case.)
thingiverse
free
Ender-2 LCD case by Reddukem
... below.
the lcd case slides onto the the front bar.
2 self tapping screws are used to hold the lcd case onto the rear fixing bar.
thingiverse
free
Touch Screen Case for Landzo 7 Inch by tgmorris99
...it but a thin screwdriver will be needed for 1 or 2 of the screws on the side with the connectors holding the lcd board in place.
thingiverse
free
Foxy YARB: Fresh RAMPS Top Cover with LCD by amats
...ll only need 4 screws and nuts to fix the lcd in place. i did't use any support for the print and the result was fairly good.
thingiverse
free
4x20 LCD + Encoder casing + mount by ERDesigns
...
the screen case and the back of the case click together and need no screws. it has a tight fit that will hold the case together.
thingiverse
free
Raspberry Pi 3 Model B+ 5 inch LCD screen combo by Photojohn
...te my own case, found some screws, that were lying in my tool box, reused some from lcd panel and designed case from what i have.
thingiverse
free
12864 LCD Display Case by SO3D
...12864 lcd display case by so3d
thingiverse
a 12864 lcd display case i made. its mounted with 2 screws to my printer base.
Tena
3dbaza
$4
IKEA OPHUS Wardrobe (101658)
...fonnes white, 180x42x113 cm<br>2. letthet<br>leg, white, metal, 11 cm<br>3. tenalt;br>box with a lid, white 25x35x20 cm<br>4. kuggis<br>container, white, 26x35x15...
3dbaza
$4
IKEA OPHUS Wardrobe with 10 doors (105851)
...25x35x20 cm<br>compartment box, 25x35x10 cm<br>box with a lid 35x50x30 cm<br>4.tena stand 3d model <br>box with a lid, white 25x35x20...
3dbaza
$4
Ikea Ophus Wardrobe with 6 Drawers and Table with ottoman (105881)
...rable 3d model<br>compartment box, 25x35x10 cm<br>4.box with the cover tena 3d model<br>box with a lid, white 25x35x20 cm<br>magazine stand,...
3dwarehouse
free
TENA
...tena
3dwarehouse
modelo de casa en tena
3dwarehouse
free
Tena
...tena
3dwarehouse
3dwarehouse
free
departamentos tena
...departamentos tena
3dwarehouse
espacios abiertos, privacidad y varias atmosfera.
3dwarehouse
free
Tena's Tex-Mex
...n restaurant. and i decided to build it and upload to the 3d warehouse. what do you think? now its fully-furnished! #scurry_texas
3dwarehouse
free
Dueluci TENA 654C10
...alumínio - vidro dimensões: c10 x p20 x a48cm vidros: ø10cm branco(b) âmbar(a) fumê(f) cristal(c) lâmpada: 1 x g9led, não inclusa
3dwarehouse
free
Dueluci TENA 654C14
...lumínio - vidro dimensões: c14 x p24 x a48cm vidro: ø14cm branco(b) âmbar(a) fumê(f) cristal(c) lâmpada: 1 x g9 led, não inclusa.
Testa
turbosquid
$39
horse head cavallo testa
...ty free 3d model horse head cavallo testa for download as obj on turbosquid: 3d models for games, architecture, videos. (1205702)
turbosquid
$95
Capo Testa Lighthouse - Sardinia / Italy
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$45
Ferrari 250 Testa Rossa 1957 3D Model
...ic retro racer italy italian supercar expensive legendary legend
ferrari 250 testa rossa 1957 3d model rendersteel 87707 3dexport
3d_export
$129
Ferrari 250 Testa Rossa 1957 3D Model
... italy italian supercar expensive legendary legend 1957 1958 1959 1960
ferrari 250 testa rossa 1957 3d model squir 31090 3dexport
cg_studio
$129
Ferrari 250 Testa Rossa 19573d model
...c4d .fbx .lwo .max .obj - ferrari 250 testa rossa 1957 3d model, royalty free license available, instant download after purchase.
3d_export
$10
Ferrari 250 Testa Rossa 250 1957
... the front suspension is made and there is an engine under the hood. sculpting and textures were used in the study of the chairs.
3ddd
$1
настенный светильник Luceplan Fortebraccio
...la lampada senza scottarsi. ingombro: s 36 cm - testa o16 cm. lampade: 1x72w e27 alogena...
thingiverse
free
Maniglia per vite M8 Testa mm13
...maniglia per vite m8 testa mm13
thingiverse
piccole e comode maniglie per vite a testa esagonale m8
thingiverse
free
testa uomo by Ganzissimo
...testa uomo by ganzissimo
thingiverse
prova di stampa di bustino esempio preso da zbrush con layer 0.15mm e altezza 30mm
Case
3d_export
$1
case
...case
3dexport
case
archibase_planet
free
Case
...case
archibase planet
showcase show-case glass case
glass-case + cakes - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
showcase show-case glass case
glass-case for chips - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case shelving drawer
case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case rack locker
case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case drawer kitchen furniture
case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case cupboard shelving
glass case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case handbag suitcase
case - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case suitcase
case 5 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
locker case dresser
case - 3d model (*.gsm+*.3ds) for interior 3d visualization.