Thingiverse
Temperature Controlled Stepper Cooling For Sidewinder X1 by ShomarrFPV
by Thingiverse
Last crawled date: 5 years, 1 month ago
This Cooler is using the Stock Fan hole on the Botom of the Housing.No Drilling or Saw needed.Only some M4 Nuts and Bolts
Now the Sidewinder is Silent on Idle, Fan spools up from 30% only when the Steppers getting warmer than 35 degree it gradual goes to Full Speed.
Temperature Probe is using the Extruder Stepper for Measuring.
Stepper Cooler for an Artic Cooling F8 Temperature Controlled Fan.https://amzn.to/3ah4Sde
u will need a 12v Source, i used a StepDown because its Cheaphttps://amzn.to/2VcS4Om
U can use the Stock Fan too with the Adapter Plate, but i do not recommend it because its very Loud.
Fits on MKS genL holder from Rics3d too, if u have that mod allready.
Now the Sidewinder is Silent on Idle, Fan spools up from 30% only when the Steppers getting warmer than 35 degree it gradual goes to Full Speed.
Temperature Probe is using the Extruder Stepper for Measuring.
Stepper Cooler for an Artic Cooling F8 Temperature Controlled Fan.https://amzn.to/3ah4Sde
u will need a 12v Source, i used a StepDown because its Cheaphttps://amzn.to/2VcS4Om
U can use the Stock Fan too with the Adapter Plate, but i do not recommend it because its very Loud.
Fits on MKS genL holder from Rics3d too, if u have that mod allready.