Thingiverse
Temp tower for labelling by Mysophobe
by Thingiverse
Last crawled date: 4 years, 1 month ago
temp-tower v1.stl
Designed for 0.2 layer height which equals 3 layer bridges & a 3 layer base.
8mm section height (40 layers)
Suitable for 0.1, 0.2, 0.4mm nozzles
2x wide on one side so you can Sharpie the starting temperature on.
Added 2 additional variations both without text on the sides.
...04noz_02layer.stl = 0.4 nozzle & 0.2 layer. Can be used with 0.1 and 0.2 nozzles also.
...06noz_03layer.stl = 0.6 nozzle & 0.3 layer. Can be use with 0.1 and 0.3 nozzles.
Designed for 0.2 layer height which equals 3 layer bridges & a 3 layer base.
8mm section height (40 layers)
Suitable for 0.1, 0.2, 0.4mm nozzles
2x wide on one side so you can Sharpie the starting temperature on.
Added 2 additional variations both without text on the sides.
...04noz_02layer.stl = 0.4 nozzle & 0.2 layer. Can be used with 0.1 and 0.2 nozzles also.
...06noz_03layer.stl = 0.6 nozzle & 0.3 layer. Can be use with 0.1 and 0.3 nozzles.