Tee shirt printing alphabet and numbers by Catcam66

Last crawled date: 3 years ago

Just converted the alphabet to use for tee shirt printing.
Print on your bed as normal peel off and place on your tee shirt.
i use flexible TPU filament cover letters with a Teflon baking sheet and iron on.
All the letters are sized to a 50mm string and 0.40 thick which i find about right.
Any problems let me know.
Update
After 48 hours I was astounded to find over 100 downloads so thought I better give some tips on how I print my cotton tee shirts.
Print all your letters and trim any stringy bits off.
I place my tee shirt on a bit of ply as I found the kitchen worktop a bit to cold.
Place out the letters allowing a bit of room for them to spread when you iron.
Drape a Teflon baking sheet over and put your iron on hot. My iron only just seems to heat the letters enough to get letters to stick to the fabric. I need to move the iron very slow and take quite a few minutes pressing down hard to get it to stick.
Leave it 5 minutes to cool and peel back slowly as you might end up with them stuck to the Teflon and not the fabric if so back down and more ironing.
Nothing guaranteed and if you have some spare cotton fabric to experiment with try that first.