Teams Presence Light with ESP32 DevKitC v4, LED ring and optional PIR by pduck

Last crawled date: 3 years, 5 months ago

This is a remix suitable for ESP32 DevKitC v4 and a 12 LED RGB Ring. You can put an optional PIR sensor HC-SR501 on top.
I used the following things in addition for this remix:
ESP32 DevKitC v4 holder: https://www.thingiverse.com/thing:4712082
Teams Logo: https://www.thingiverse.com/thing:4590686
PIR Holder: https://www.thingiverse.com/thing:291270
The original project with all instructions and material can be found here: https://toblum.github.io/ESPTeamsPresence/
I have a fork including the PIR logic here: https://github.com/pduck27/ESPTeamsPresence
The following hardware fits to the base and the PIR holder:
ESP32 DevKitC v4: https://www.az-delivery.de/products/esp-32-dev-kit-c-v4
RGB LED Ring WS2812 12 LEDs 37mm: https://www.az-delivery.de/products/rgb-led-ring-ws2812-mit-12-rgb-leds-5v-fuer-arduino
HC-SR501 https://www.az-delivery.de/products/bewegungsmelde-modul
To remix or change something you can access all files on Tinkercad: https://www.tinkercad.com/things/7HenaJ4JxSl
Hints:
Printing the solid case including PIR holder costs a lot of support. Printing it seperately is possible without support but I am not satisfied with the glue solution right now. Maybe the PIR should set directly in the top layer (be aware of 120° view angle) or some marks should be added to glue more solid.
The PIR has to be pressed into the housing with gentle force. Bend the pins a little beforehand.
The base has two small glitches I recognized after the print. But they do not matter because the cube covers them. In the back there is a small bulge and at the front are two none solid parts. So don't wonder at your print.