Thingiverse
Team Losi LXT Front Arms by rcnand
by Thingiverse
Last crawled date: 4 years, 10 months ago
Front A-arms for the Team Losi LXT.
These arms have been modified slightly and are smooth. This allows some ability to manipulate infill/wall thicknesses to modify flex characteristics of the arms. If a webbed version is desired, let me know.
Ream the hinge pin areas with a 1/8" drill bit. Tap the shock mounting area with a 4-40 tap. Hole sizes have been adjusted to account for my tolerances/shrink but if you have a better setup, you may need to adjust the sizes accordingly.
These arms have been modified slightly and are smooth. This allows some ability to manipulate infill/wall thicknesses to modify flex characteristics of the arms. If a webbed version is desired, let me know.
Ream the hinge pin areas with a 1/8" drill bit. Tap the shock mounting area with a 4-40 tap. Hole sizes have been adjusted to account for my tolerances/shrink but if you have a better setup, you may need to adjust the sizes accordingly.