Thingiverse
Team Losi JRX / LXT Series Front Bulkhead by rcnand
by Thingiverse
Last crawled date: 4 years, 11 months ago
Front bulkhead for the a variety of Team Losi vintage vehicles (JRX2, JRX-Pro, JRX-Pro SE, Junior 2, Junior T, JRXT, and LXT).
This is slightly modified versus the original and probably would weigh more at higher infills. This likely is not a bad thing as Lipo based systems in older cars tend to be lighter. You may need to vary infill to get the ideal weight if you want it to match "exactly".
There are a variety of these on Thingiverse, etc., so by all means choose the one that you feels works best. I may remodel this at some point to try to get more material around the hinge mount.
Tap the chassis mounting holes with a 8-32 tap. Tap the shock tower mounts with a 4-40 tap. Ream the hinge pin holes with a 1/8" drill bit.
This is slightly modified versus the original and probably would weigh more at higher infills. This likely is not a bad thing as Lipo based systems in older cars tend to be lighter. You may need to vary infill to get the ideal weight if you want it to match "exactly".
There are a variety of these on Thingiverse, etc., so by all means choose the one that you feels works best. I may remodel this at some point to try to get more material around the hinge mount.
Tap the chassis mounting holes with a 8-32 tap. Tap the shock tower mounts with a 4-40 tap. Ream the hinge pin holes with a 1/8" drill bit.