Thingiverse
TBS Source One V4 Nano Camera Plate 20mm slammed by Loon3k
by Thingiverse
Last crawled date: 4 years, 6 months ago
I have created replacement camera plates for my TBS Source One V4 Frame to be able to slamm the deck with 20mm Standoffs and fit a nano camera (14mm).
To give the frame back some rigidity, I connected the first two standoffs (mayor concern with slamming and therefore removing the 30mm camera plates)
Depending on the accuracy of your print you might have to drill out the holest a bit to get a snug fit on the standoffs. I intentionally did not make them too wide. I used a 5mm drill and it fit perfectly on my knurled M3 standoffs.
Happy flying
To give the frame back some rigidity, I connected the first two standoffs (mayor concern with slamming and therefore removing the 30mm camera plates)
Depending on the accuracy of your print you might have to drill out the holest a bit to get a snug fit on the standoffs. I intentionally did not make them too wide. I used a 5mm drill and it fit perfectly on my knurled M3 standoffs.
Happy flying