Thingiverse
TBS Source One Arm Bumper / Motor Antivibration / Landing Gear 0.2 v3 by piaosn
by Thingiverse
Last crawled date: 4 years, 7 months ago
Arm Bumper / Motor Antivibration Pad / Landing Gear 3 In 1.
Suitable for TBS Source One v0.2 and v3 with 4mm arm.
Weight 2.8 gram each.
Notice:
Don't over tighten these screws, use some blue loctite instead.
The motor pad is 1.5mm thick. I found that 9mm screws work well for me. 10mm screws may work as well, but pay attention don't let these screws damage your motor wires.
Suitable for TBS Source One v0.2 and v3 with 4mm arm.
Weight 2.8 gram each.
Notice:
Don't over tighten these screws, use some blue loctite instead.
The motor pad is 1.5mm thick. I found that 9mm screws work well for me. 10mm screws may work as well, but pay attention don't let these screws damage your motor wires.