Thingiverse
TBS CRSF Tango 2 wireless simulator gamepad dongle by krislabs
by Thingiverse
Last crawled date: 4 years, 5 months ago
Team Blacksheep gamepad dongle based on Betaflight flight controller for use with simulators
Items needed:
16x16mm FC:https://www.hglrc.com/collections/fc/products/fd411-flight-controller
TBS CROSSFIRE NANO RXhttps://www.team-blacksheep.com/products/prod:crossfire_nano_rx
Antenna:https://www.team-blacksheep.com/products/prod:xf_race_868https://www.team-blacksheep.com/products/prod:xfrace_ant_915https://www.team-blacksheep.com/products/prod:minimortal_t_ant
Betaflight tutorial:https://github.com/betaflight/betaflight/wiki/HID-Joystick-Support
Use soldering iron at around 200C (depending on filament) to melt pins and fix FC in place. Cyanoacrylate glue can be used for fixing top plate. Kapton tape was used for FC and receiver isolation.
Fusion360 project file included
Items needed:
16x16mm FC:https://www.hglrc.com/collections/fc/products/fd411-flight-controller
TBS CROSSFIRE NANO RXhttps://www.team-blacksheep.com/products/prod:crossfire_nano_rx
Antenna:https://www.team-blacksheep.com/products/prod:xf_race_868https://www.team-blacksheep.com/products/prod:xfrace_ant_915https://www.team-blacksheep.com/products/prod:minimortal_t_ant
Betaflight tutorial:https://github.com/betaflight/betaflight/wiki/HID-Joystick-Support
Use soldering iron at around 200C (depending on filament) to melt pins and fix FC in place. Cyanoacrylate glue can be used for fixing top plate. Kapton tape was used for FC and receiver isolation.
Fusion360 project file included