Thingiverse
Tatacon -> USB Converter Case by montymintypie
by Thingiverse
Last crawled date: 4 years ago
A case for your Tatacon to USB Converter, obtained here.
If your converter came with a case, it is V5. Otherwise, use the V4 files.
Early revisions of the V5 had a 1.6mm PCB. Later revisions use a 0.8mm PCB. For these later revisions, use the V5_Thin files.
It's quite a tight fit - you might need to modify the 'fat' and 'fudge' parameters if your printer tolerances aren't great. 'fat' makes the PCB width bigger, 'fudge' makes everything looser.
If your converter came with a case, it is V5. Otherwise, use the V4 files.
Early revisions of the V5 had a 1.6mm PCB. Later revisions use a 0.8mm PCB. For these later revisions, use the V5_Thin files.
It's quite a tight fit - you might need to modify the 'fat' and 'fudge' parameters if your printer tolerances aren't great. 'fat' makes the PCB width bigger, 'fudge' makes everything looser.