Thingiverse
Tarmo4 Drivetrain Upsize by hottflush
by Thingiverse
Last crawled date: 4 years, 6 months ago
Replacement components to allow the use of 24x15x5mm bearings along the drive-train for the Tarmo4 project car. Same size as the diff output bearings, one bearing size for the entire project!
Personally I kept shearing the main output and gearbox pinion gears or rounding out the inserts of the flex driveshafts. The aim was to move the weak point to the dog bones since they are far easier to replace.
Every part is a drop in replacement for the original parts.
Battery tray was raised 4mm to allow for driveshaft clearance.
Stock steering bracket should clear, but I made one with extra clearance.
Good luck!
Personally I kept shearing the main output and gearbox pinion gears or rounding out the inserts of the flex driveshafts. The aim was to move the weak point to the dog bones since they are far easier to replace.
Every part is a drop in replacement for the original parts.
Battery tray was raised 4mm to allow for driveshaft clearance.
Stock steering bracket should clear, but I made one with extra clearance.
Good luck!