tarmo 3 upgrades v2

Last crawled date: 4 years, 2 months ago

I wanted to put a body on that fit the width of the chassis so instead of redesigning all of those components I simply extended the car to match the width respectively by adding in a mid chassis part, extending my front drive shaft and extending the servo steering linkage rod...super simple
I mocked up the tarmo car in 3d builder then placed the z06 body on top then scaled up the body until the wheel wells almost cover the wheels that's how I got the length which turned out to be 70mm increase
the parts are quick to print and drop into the original position with ease
the servo link is just a typical turnbuckle style that I made a new rod for
now the car looks scale and with the sportscar look actually fits the speed better
thank you to the people who have shared there designs that have made this project awesome
update 2/10/2020 had a few requests for the body files so here they are. I had to split them to fit my printer. the front will print without supports but you will need to clean up some strings if your machine doesn't bridge well. you should print the rear split files no support needed just glue them together. the split cabin will need to be glued together as well. the 3 complete body pieces bolt together via counter sunk m3 screws in the wheel wells. the body is thick I printed mine with 10%infill also I had to do some serious sanding to the inner wheel wells in front to get the full turning radius for size tires I have the grill and fog lenses just glue in