Thingiverse
Taig Home and Limit Switches by simparticle
by Thingiverse
Last crawled date: 3 years ago
These are a complete set (for X and Y, Z has just one switch) of home and limit switch holders/mounts for the Taig mill, specifically for those with a CNC model.
They are designed specifically to utilize OMRON switches (model V-10G6-1C24-K, https://www.mouser.com/ProductDetail/653-V-10G6-1C24-K). You can see the datasheet here: https://www.mouser.com/datasheet/2/307/en-v-952614.pdf
The Taig mill's X and Y axis rails (and hence these design files) use 4-40 and 10-32 bolts and square nuts.
Here is the necessary hardware to affix the home and limit switches to the Taig mill:
The X axis switch mount hardware (fits the Taig X axis t-slot):
"Low-Strength Steel Square Nut Zinc-Plated, 4-40 Thread Size"https://www.mcmaster.com/#catalog/94855A281
"Zinc-Plated Steel SAE Washer for Number 4 Screw Size, 0.125" ID, 0.312" OD"https://www.mcmaster.com/#catalog/90126A505
"Zinc-Plated Alloy Steel Socket Head Screw 4-40 Thread Size, 7/8" Long"https://www.mcmaster.com/#catalog/90128A114
The Y and Z axis switch mount hardware (fits the Taig Y axis t-slot, and the two holes on the Z axis):
"Low-Strength Steel Square Nut, Zinc-Plated, 10-32 Thread Size"https://www.mcmaster.com/#catalog/94855A283
"Zinc-Plated Steel SAE Washer for Number 10 Screw Size, 0.219" ID, 0.5" OD"https://www.mcmaster.com/#catalog/90126A514
"Zinc-Plated Alloy Steel Socket Head Screw 10-32 Thread Size, 1" Long"https://www.mcmaster.com/#catalog/90128A947
"Zinc-Plated Alloy Steel Socket Head Screw 10-32 Thread Size, 1/2" Long"https://www.mcmaster.com/#catalog/90128A942
The 'side' holes in the designs are for a suitable shielded 2-conductor wire to fit through. You can fill the hole or drill it out accordingly to fit whatever wire you use to affix the switches in your CNC arrangement.
I used this wire for my home and limit switches, and the holes are designed accordingly:https://www.amazon.com/Conductor-Stranded-Cable-Custom-Connection/dp/B071DFHKRB/ref=sr_1_1_sspa/146-5759635-1578711?ie=UTF8&qid=1529381780&sr=8-1-spons&keywords=22+awg+2+conductor+wire&psc=1
They are designed specifically to utilize OMRON switches (model V-10G6-1C24-K, https://www.mouser.com/ProductDetail/653-V-10G6-1C24-K). You can see the datasheet here: https://www.mouser.com/datasheet/2/307/en-v-952614.pdf
The Taig mill's X and Y axis rails (and hence these design files) use 4-40 and 10-32 bolts and square nuts.
Here is the necessary hardware to affix the home and limit switches to the Taig mill:
The X axis switch mount hardware (fits the Taig X axis t-slot):
"Low-Strength Steel Square Nut Zinc-Plated, 4-40 Thread Size"https://www.mcmaster.com/#catalog/94855A281
"Zinc-Plated Steel SAE Washer for Number 4 Screw Size, 0.125" ID, 0.312" OD"https://www.mcmaster.com/#catalog/90126A505
"Zinc-Plated Alloy Steel Socket Head Screw 4-40 Thread Size, 7/8" Long"https://www.mcmaster.com/#catalog/90128A114
The Y and Z axis switch mount hardware (fits the Taig Y axis t-slot, and the two holes on the Z axis):
"Low-Strength Steel Square Nut, Zinc-Plated, 10-32 Thread Size"https://www.mcmaster.com/#catalog/94855A283
"Zinc-Plated Steel SAE Washer for Number 10 Screw Size, 0.219" ID, 0.5" OD"https://www.mcmaster.com/#catalog/90126A514
"Zinc-Plated Alloy Steel Socket Head Screw 10-32 Thread Size, 1" Long"https://www.mcmaster.com/#catalog/90128A947
"Zinc-Plated Alloy Steel Socket Head Screw 10-32 Thread Size, 1/2" Long"https://www.mcmaster.com/#catalog/90128A942
The 'side' holes in the designs are for a suitable shielded 2-conductor wire to fit through. You can fill the hole or drill it out accordingly to fit whatever wire you use to affix the switches in your CNC arrangement.
I used this wire for my home and limit switches, and the holes are designed accordingly:https://www.amazon.com/Conductor-Stranded-Cable-Custom-Connection/dp/B071DFHKRB/ref=sr_1_1_sspa/146-5759635-1578711?ie=UTF8&qid=1529381780&sr=8-1-spons&keywords=22+awg+2+conductor+wire&psc=1
Similar models
grabcad
free
Configurable Screws
...ad-screws/
https://www.mcmaster.com/screws/flat-head-screws/hex-drive-flat-head-screws/alloy-steel-hex-drive-flat-head-screws-9/
thingiverse
free
And, Or, Not gates by Tamaren
...ze, 3/8" long
92220a144 alloy steel low-profile socket head screw hex drive, black oxide, 6-32 thread size, 5/8" long
grabcad
free
Unified Steel Hex Head Thread-Cutting Screws for Metal
...ews for metal
• 90096a550 - zinc-plated steel hex/slotted head 1/4"-20 x 2" long type f thread-cutting screws for metal
thingiverse
free
Y Limit Switch Brackets for Taig Mill by tymm
...1 switches)
2 - 10-24 x 7/16 screws (or 10-24 x 1/2 and 1 or 2 10-24 washers)
2 - 10-24 nuts
2 - 2-56 x 7/16 screws
2 - 2-56 nuts
grabcad
free
Ground Rod Clamp - Steel - 1/2" to 1"
...oy and features steel screws. the grounding clamp is suitable for use with 1/2" to 1" water pipes and 10 to 2 awg wire.
thingiverse
free
Shapeoko Limit Switch Holders - Omron Lever Style Switch by BenHarper
...nagement to have the wires leading to the motor plates with other wires than it is to have the limits at the corners of the mill.
grabcad
free
Unified Steel Locknuts with External-Tooth Lock Washer
...l, black zinc-plate
• hex locknut with external-tooth lock washer, 1/4"-20 thread, 7/16" width, steel, black zinc-plate
grabcad
free
Taig Turn toolpost
...g turn 4029cr cnc lathe. hardware is downloaded from mcmaster carr. screw holes are tap drill size, .159", for 10-32 screws.
thingiverse
free
Oculus Touch Split Gun Stock (Dead Effect 2, Onward, Pavlov) by Djacobs123
...https://www.mcmaster.com/#square-nuts/=1be8g3t
if you buy these all from mcmaster, this will cost you about $38.37 plus shipping.
thingiverse
free
Shapeoko V2 Y axis homing and limit switch mounts by fjohn624
... it hides inside the x axis rails. the stops are adjustable and are sized for m5 bolts. simply tap them so they can have threads.
Taig
thingiverse
free
Spindle wrench for a Taig mill by ponko
...spindle wrench for a taig mill by ponko
thingiverse
spindle wrench for a taig mill
thingiverse
free
Taig Lathe RH Foot by MTXMUGEN
...taig lathe rh foot by mtxmugen
thingiverse
adds much needed support to the taig lathe!
thingiverse
free
taig lathe end cap -pressfit- by MTXMUGEN
...taig lathe end cap -pressfit- by mtxmugen
thingiverse
press fit endcap for the taig lathe!
thingiverse
free
Taig Tool Light by smontanus
...equired to construct the light and a schematic to help with electronics construction. these were printed in black and orange abs.
thingiverse
free
Indicator Holder for Taig Lathe by NickAmes
...dicator on the bed of a taig lathe, allowing it to measure movement of the carriage. designed for indicators with a 3/8 in. stem.
thingiverse
free
Taig Lathe Bolt Hobber Revised by mde091234
...obber, but extended to work with the tool holder on my mini lathe. the original came from http://www.thingiverse.com/thing:234155
thingiverse
free
er16 and Taig collet holder for Kennedy toolbox by nozzle_police
...lder/rack for taig and two sets of er16 collets. made to fit into one of the larger drawers in a kennedy machinist's toolbox.
thingiverse
free
Taig 5019CR mill stock column top table
...ontroller on top of taig coumn in order to save some space.
the z-axis home sensor link:https://www.thingiverse.com/thing:3923297
thingiverse
free
Spindle camera for TAIG micro CNC mill by AnthonyT
... supplied for accurate center point positioning.
use paper with dots on it for rotation center calibration. example pdf included.
thingiverse
free
Indicator Holder for Taig Lathe_Mk 2
...10-32 screw and nut and one 8-32 screw and nut. i put a thumb screw cap on the clamping screw to make it that much easier.
enjoy!
Limit
3ddd
free
Curations Limited
...curations limited
3ddd
curations limited
curations limited
3ddd
$1
Curations Limited
...rations limited
3ddd
curations limited , барный
барный стул по мотивам curations limited
3ddd
free
Curations Limited
...ed , стеллаж
полки, стол и зеркало от curations limited с текстурами и материалами v-ray
3d_export
$5
plastic limit knob
...plastic limit knob
3dexport
plastic limit knob
3d_export
$5
machine limit knob
...machine limit knob
3dexport
machine limit knob
3ddd
free
Curations Limited
...абажуром из хлопка. ножка, напоминающая вазу, выполнена из выдувного стекла, основание – из латуни.
размеры, см: 69х36 (диаметр).
turbosquid
$39
set15 - No limits
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
free
Curations Limited Lauran
...нд: curations limited. размеры, см: 110х95х99 см.http://360.ru/goods/0/0/0/107996/ - ссылка на описание данного кресла.
design_connected
$25
Chester - Limited Edition
...nnected
established & sons chester - limited edition computer generated 3d model. designed by future systems, amanda levete.
3ddd
$1
KROKEN LIMITED EDITION
...d
rochebobois
autumn/winter collections 2012 rochebobois paris
kroken limited edition armchairhttp://m.roche-bobois.com
Switches
archibase_planet
free
Switch
...switch
archibase planet
switch cluster switch
light switch 1 - 3d model for interior 3d visualization.
archibase_planet
free
Switch
...switch archibase planet switches switch switch 1 - 3d model (*.gsm+*.3ds) for interior...
archibase_planet
free
Switch
...switch
archibase planet
closer button switch cluster switch
switch - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Switch
...switch
archibase planet
switch closer
light switch 2 - 3d model for interior 3d visualization.
archibase_planet
free
Switch
...switch
archibase planet
closer button switch
switch n300808 - 3d model (*.gsm+*.3ds) for interior 3d visualization
archibase_planet
free
Switch
...switch
archibase planet
closer button switch
switch n141108 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Switch
...switch
archibase planet
cluster switch closer
switch n260609 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Switch
...switch
archibase planet
button switch closer
switch 2 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Switch
...switch
archibase planet
button switch closer
switch n070510 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$5
switch
...switch
3dexport
3d model of a low-poly switch
Home
3d_export
$8
Home
...home
3dexport
home
3d_export
$8
Home
...home
3dexport
home
3d_export
$5
home
...home
3dexport
home
3d_export
free
Home
...home
3dexport
this is home.
3d_export
$5
home
...home
3dexport
home god izi
3d_export
$5
home
...home
3dexport
3d model home
3d_export
free
home
...home
3dexport
home. render and cycles
3ddd
free
Zara Home
...home , zara home , декоративный набор
zara home
3d_export
$5
Home sweet home 3D Model
...home sweet home 3d model
3dexport
home model made in google sketch up
home sweet home 3d model snakeplease 100984 3dexport
3ddd
$1
Ambella Home
...ambella home
3ddd
ambella home , консоль
ambella home