Thingiverse
Tadpole 3 VTX and RX Holder by tinooo
by Thingiverse
Last crawled date: 4 years, 8 months ago
Since the Tadpole 3 does not offer any "good" option to mount a VTX and a RTX securely, I've designed this mount.
It was designed to work with the following components:
16x16 Stack (HGLRC FD413) -> any other 16x16 stack might work. Beware of the clearance between the stack and the VTX mount
eachine nano vtx (v1) -> TBS Unify pro Nano might also work
Emax tiny D8 receiver
PLA might deform due to the heat of the VTX. I printed in PETG, no issues so far.
It was designed to work with the following components:
16x16 Stack (HGLRC FD413) -> any other 16x16 stack might work. Beware of the clearance between the stack and the VTX mount
eachine nano vtx (v1) -> TBS Unify pro Nano might also work
Emax tiny D8 receiver
PLA might deform due to the heat of the VTX. I printed in PETG, no issues so far.