Thingiverse
Tablet Arm by JustSumGuy
by Thingiverse
Last crawled date: 4 years, 6 months ago
Modified to use M6 bolts and nylon lock nuts.
I printed with 3 perimeters at 50% infill with PLA .4 nozzle and 1.5 layer height. The swivel head is the only part that needs support to print and likely just build surface support at that, I printed all at once with full support tho :)
I used 3m VHB to stick the tablet on.
You will need:
2 x 65mm M6 Hex Head Bolt
2 x 35mm M6 Hex Head Bolt
4 x Nylock M6 Nuts
Optional 4 x Traxas body washers #1815
I built it primarily to use an android tablet with IP webcam and chrome on my Duet Wifi HyperCube EVO printer. Mounts directly to 3030 extrusion beautifully and swings out of the way easily.
https://play.google.com/store/apps/details?id=com.pas.webcam&hl=en
I printed with 3 perimeters at 50% infill with PLA .4 nozzle and 1.5 layer height. The swivel head is the only part that needs support to print and likely just build surface support at that, I printed all at once with full support tho :)
I used 3m VHB to stick the tablet on.
You will need:
2 x 65mm M6 Hex Head Bolt
2 x 35mm M6 Hex Head Bolt
4 x Nylock M6 Nuts
Optional 4 x Traxas body washers #1815
I built it primarily to use an android tablet with IP webcam and chrome on my Duet Wifi HyperCube EVO printer. Mounts directly to 3030 extrusion beautifully and swings out of the way easily.
https://play.google.com/store/apps/details?id=com.pas.webcam&hl=en