Thingiverse
T4 mini Arm with LEDs by willumpie
by Thingiverse
Last crawled date: 4 years, 4 months ago
remixed from 24mm arm (1806 motor) https://www.thingiverse.com/thing:304237
I have redrawn the part completely (STL is messy when imported) I Added room for 3x 5050 size Leds strip (60leds/m), eg WS2812.
Inside the closed part of the circle is a channel to feed thin wires into the tube (I used 0,25mm2) also increased motor vents at the bottom to give a bit more air to the motor windings
I added the solidworks source file for you to modify to fit your needs. note, this is WIP, Work In Progress
20150816 -> v2: (final)
made the openings a little bigger to ease the installation of the LEDs.
I have redrawn the part completely (STL is messy when imported) I Added room for 3x 5050 size Leds strip (60leds/m), eg WS2812.
Inside the closed part of the circle is a channel to feed thin wires into the tube (I used 0,25mm2) also increased motor vents at the bottom to give a bit more air to the motor windings
I added the solidworks source file for you to modify to fit your needs. note, this is WIP, Work In Progress
20150816 -> v2: (final)
made the openings a little bigger to ease the installation of the LEDs.