T300 GTE Blackout Mod (Thrustmaster buttons/logo) by jtkw

Last crawled date: 5 years, 4 months ago

I've spent countless hours measuring and printing these to ensure that they fit properly, print (relatively) easily and look great. I have released them for free but do feel free to make a donation if you like the end product :)
What this is:
Buttons and center logo replacement for the Thrustmaster T300 Ferrari GTE sim racing wheel.
Both are quick prints, ~10-15mins

May work for other wheels too, do try and report back if you do :)
What to print:
For the buttons:
Each button is made up of 1 pin ("Button Pin_T300GTE.stl") and 1 button ("Buttton_T300GTE.stl")
The pin is inserted into the bottom of the button, with the hex head going into the bottom hole of the button
For the center logo:
2 versions are provided:
McLaren logo ("LogoMcLaren_T300GTE.stl")
Blank logo for customization ("LogoBlank_T300GTE.stl")

Installation:
For both the buttons and the logo, you will have to take apart the wheel itself. This is a simple process and the whole thing should take less than 10 minutes.
Buttons: Reuse the rubber part found under each of the original steering wheels
Logo: Pop out the original Ferrari logo by releasing the clips and snap in the new one. Be careful as the clips may be fragile
Do share your makes!