Synth Piano Body by sporp

Last crawled date: 3 years, 4 months ago

Check it out in action here:https://youtu.be/OEwcKVPtzbo
A quick and dirty holder for 13 reverse avalanche oscillators and a few buttons!
To make it, print the oscillator_holder_body.stl, osc holder_5.stl and two copies of the osc holder.stl
EDIT: Updated the body to v2 since a cut at the bottom is needed to insert the buttons! You can dremel it out, but v2 doesn't require that. Also I uploaded the openSCAD code! Feel free to use it!
Follow this tutorial from look mum no computer on how to make the synth. You'll need 13 of these:https://www.youtube.com/watch?v=zCTLeNxge54
You'll just need to run power rails to all oscillators, then run the outputs of each synth through its own button. Then the other side of the button needs to be put onto a rail that goes to the output of the aux jack. I got cheeky with it and made the regular notes go to the left ear and all the flats/sharps go to the right. Finally you'll need power in the form of an 18v wall wart. I found one that had a bunch of adapters, and was able to sacrifice one to be the power jack on the back of the synth.