Thingiverse
Sylvester the Cat by reddadsteve
by Thingiverse
Last crawled date: 3 years, 2 months ago
Sylvester James Pussycat, Sr. is a fictional character, an anthropomorphic tuxedo cat in the Looney Tunes and Merrie Melodies series of cartoons.
Sylvester appeared in 103 cartoons and most of his appearances have him often chasing Tweety, Speedy Gonzales, or Hippety Hopper. Three of his cartoons won Academy Awards, the most for any starring Looney Tunes character. Sylvester's trademark exclamation is "Sufferin' succotash!"
No supports are required. One piece contains built-in supports, an optional part without the built-in supports is also supplied if you want to use your slicer supports. If you have the proper filament colors, no painting is needed.
The assembled model is 200mm tall and is in proportion to my Tweety model:
https://www.thingiverse.com/thing:4820736
Enjoy!
...........................................................................................................
Print Instructions:
Supports: No
Resolution: .2mm
Infill: 10%
Notes:**
Refer to the notes below for a few helpful printing and assembly instructions.
...........................................................................................................
Building the model
Colors
Black: (Paramount3D PLA - Black)
body_black
body_black_without_supports (optional piece without built-in supports)
eye_blacks (contains two identical pieces)
whiskers_right (contains two identical pieces)
whiskers_left (contains two identical pieces)
foot_pad_left
foot_pad_right
..
Red: (Hachbox PLA - True Red)
mouth
nose
..
White: (Overture PLA - White)
eye_white_left
eye_white_right
tail_white
body_white
hand_left
hand_right
foot_left
foot_right
ear_left
ear_right
hair_back_left
hair_back_right
..
Pearl: (Protoparadigm PLA, out of business - White Pearl)
claws_hands (contains eight identical pieces)
claws_feet (contains six identical pieces)
..
Pink: (Paramount3D PLA - Harajuku Pink)
tongue
...........................................................................................................
Printing and assembly tips
Printing tips
1 - No supports are required.
2 - There are some pieces that may need brims or rafts, use your discretion. When setting up my prints I prefer to be conservative, especially since the base of many parts are hidden when inserted into another part. For the smaller parts, a good first layer is helpful.
*I used brims on:
claws_hands
claws_feet
hand_left
hand_right
3 - I used a pearl white color for the claws to hightlight them. A clear transparent with a higher infill may work well, or a silky white.
4 - The body_black piece is taller than any of my other models. It fits on my Prusa MK3 but not on the Prusa mini. Be sure to check this part first to ensure your printer can handle the height. The model can be resized down, but be careful to check that the small parts can still be printed.
..
Assembly tips:
1 - Take your time gluing the model together and enjoy the process.
2 - I used E6000 sticky craft glue to put this model together. The sticky glue allows more time to position the parts than a fast drying superglue. I have 'fat fingers' and a shaky hand, so the sticky glue works out best for me, especially with small pieces. Just remember to leave enough time for the glue to set before combining too many parts.
3 - Be sure to insert the body_white (with completed mouth/tongue) into the body_black before attaching the hands.
4 - All the claws have round bases. Be sure to rotate the nail in the correct direction when inserting and gluing them in.
5 - The whiskers fit perfectly, but need to be positioned correctly to insert them. The flat side from the printer bed faces back. The holes are notched and the whiskers only fit one way. Personally, I had to keep poking around to fit them in but once positioned correctly they slid right in.
6 - Refer to the assembly diagrams in the pictures section as well as the uploaded pictures for putting the model together. The model is meant to be glued.
Do not hesitate to ask questions, feedback is essential to making better models.
Sylvester appeared in 103 cartoons and most of his appearances have him often chasing Tweety, Speedy Gonzales, or Hippety Hopper. Three of his cartoons won Academy Awards, the most for any starring Looney Tunes character. Sylvester's trademark exclamation is "Sufferin' succotash!"
No supports are required. One piece contains built-in supports, an optional part without the built-in supports is also supplied if you want to use your slicer supports. If you have the proper filament colors, no painting is needed.
The assembled model is 200mm tall and is in proportion to my Tweety model:
https://www.thingiverse.com/thing:4820736
Enjoy!
...........................................................................................................
Print Instructions:
Supports: No
Resolution: .2mm
Infill: 10%
Notes:**
Refer to the notes below for a few helpful printing and assembly instructions.
...........................................................................................................
Building the model
Colors
Black: (Paramount3D PLA - Black)
body_black
body_black_without_supports (optional piece without built-in supports)
eye_blacks (contains two identical pieces)
whiskers_right (contains two identical pieces)
whiskers_left (contains two identical pieces)
foot_pad_left
foot_pad_right
..
Red: (Hachbox PLA - True Red)
mouth
nose
..
White: (Overture PLA - White)
eye_white_left
eye_white_right
tail_white
body_white
hand_left
hand_right
foot_left
foot_right
ear_left
ear_right
hair_back_left
hair_back_right
..
Pearl: (Protoparadigm PLA, out of business - White Pearl)
claws_hands (contains eight identical pieces)
claws_feet (contains six identical pieces)
..
Pink: (Paramount3D PLA - Harajuku Pink)
tongue
...........................................................................................................
Printing and assembly tips
Printing tips
1 - No supports are required.
2 - There are some pieces that may need brims or rafts, use your discretion. When setting up my prints I prefer to be conservative, especially since the base of many parts are hidden when inserted into another part. For the smaller parts, a good first layer is helpful.
*I used brims on:
claws_hands
claws_feet
hand_left
hand_right
3 - I used a pearl white color for the claws to hightlight them. A clear transparent with a higher infill may work well, or a silky white.
4 - The body_black piece is taller than any of my other models. It fits on my Prusa MK3 but not on the Prusa mini. Be sure to check this part first to ensure your printer can handle the height. The model can be resized down, but be careful to check that the small parts can still be printed.
..
Assembly tips:
1 - Take your time gluing the model together and enjoy the process.
2 - I used E6000 sticky craft glue to put this model together. The sticky glue allows more time to position the parts than a fast drying superglue. I have 'fat fingers' and a shaky hand, so the sticky glue works out best for me, especially with small pieces. Just remember to leave enough time for the glue to set before combining too many parts.
3 - Be sure to insert the body_white (with completed mouth/tongue) into the body_black before attaching the hands.
4 - All the claws have round bases. Be sure to rotate the nail in the correct direction when inserting and gluing them in.
5 - The whiskers fit perfectly, but need to be positioned correctly to insert them. The flat side from the printer bed faces back. The holes are notched and the whiskers only fit one way. Personally, I had to keep poking around to fit them in but once positioned correctly they slid right in.
6 - Refer to the assembly diagrams in the pictures section as well as the uploaded pictures for putting the model together. The model is meant to be glued.
Do not hesitate to ask questions, feedback is essential to making better models.
Similar models
thingiverse
free
Old Hag by reddadsteve
... model together. the model is meant to be glued.
do not hesitate to ask questions, feedback is essential to making better models.
thingiverse
free
Bugs Bunny by reddadsteve
... model together. the model is meant to be glued.
do not hesitate to ask questions, feedback is essential to making better models.
thingiverse
free
Elmer Fudd by reddadsteve
... model together. the model is meant to be glued.
do not hesitate to ask questions, feedback is essential to making better models.
thingiverse
free
Rosie the Robot by reddadsteve
... model together. the model is meant to be glued.
do not hesitate to ask questions, feedback is essential to making better models.
cg_trader
$5
Sylvester holding Tweety - Looney Tunes | 3D
...d
cg trader
apparently sylvester got tweety looney tunes sylvester tweety cat bird male furry anthro feline avian art sculptures
thingiverse
free
Tweety by reddadsteve
...- a number of the left/right parts look quite similar but are actually different. .. assembly tips: 1 -take...
thingiverse
free
Prickle by reddadsteve
... model together. the model is meant to be glued.
do not hesitate to ask questions, feedback is essential to making better models.
thingiverse
free
Schroeder by reddadsteve
... model together. the model is meant to be glued.
do not hesitate to ask questions, feedback is essential to making better models.
thingiverse
free
Tweety Bird by reddadsteve
...- a number of the left/right parts look quite similar but are actually different. .. assembly tips: 1 -take...
thingiverse
free
Eeyore by reddadsteve
... model together. the model is meant to be glued.
do not hesitate to ask questions, feedback is essential to making better models.
Reddadsteve
thingiverse
free
Dilbert by reddadsteve
...required. if you have the right filament colors, no painting is needed.
the completed model is 225mm tall after assembly.
enjoy!
thingiverse
free
Dogbert by reddadsteve
...assembly. this model is in proportion to the dilbert, wally and pointy haired boss models that i've previously posted.
enjoy!
thingiverse
free
Hagar the Horrible by reddadsteve
...printing the pieces in the suggested colors. no supports are required.
hagar may look fierce but he is really a pussycat.
enjoy!
thingiverse
free
Rat by reddadsteve
...all after assembly. this model is in proportion to the pig and crocodile models from the comic that i've also posted.
enjoy!
thingiverse
free
Pig by reddadsteve
...tall after assembly. this model is in proportion to the pig and crocodile models from the comic that i've also posted.
enjoy!
thingiverse
free
Crocodile by reddadsteve
...tall after assembly. this model is in proportion to the pig and crocodile models from the comic that i've also posted.
enjoy!
thingiverse
free
Alice by reddadsteve
...n proportion to the dilbert, wally, pointy haired boss and dogbert models from the comic that i've previously posted.
enjoy!
thingiverse
free
Wally by reddadsteve
... is 200mm tall after assembly. this model is in proportion to the dilbert and pointy haired boss models previously posted.
enjoy!
thingiverse
free
Charlie Brown by reddadsteve
...ad luck.
no supports are required. if you have the proper filament colors, no painting is needed.
the model is 140mm tall.
enjoy!
thingiverse
free
Kermit the Frog by reddadsteve
...o supports are required. if you have the proper filament colors, no painting is needed.
the assembled model is 140mm tall.
enjoy!
Sylvester
3d_export
$35
Sylvester
...sylvester
3dexport
sylvester : poligon : 68.639 vertices : 68.702 extentions : - zbrush - obj - stl
turbosquid
$140
Sylvester Stallone
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$15
Sylvester the cat 3D Model
...3dexport
sylvester the cat looney tunes cartoon toon cute rigged riged high poly
sylvester the cat 3d model buncic 80587 3dexport
3ddd
free
Шезлонг SYLVESTER
...указана здесь:http://www.trend-interior.ru/catalog/stulya-italiya/sylvester.html
турбосмус не свернут, развертки есть.
3ddd
free
Кованая лестница
...ковка , перила кованая лестница от студии художественной ковки alexandr&sylvester ...
3d_export
$15
bowie legionnaire knife
...knife<br>gil hibben has a history of designing knives for sylvester stallone to feature in his films, going back to...
thingiverse
free
Sylvester stencil 2 by Longquang
...sylvester stencil 2 by longquang
thingiverse
sylvester
thingiverse
free
Sylvester Birdhouse by bigdlou
...sed on sylvester character from looney toons, i placed 3 rings to hang and stabilize the bird house since it will be front heavy.
3d_sky
$8
Deckchair SYLVESTER
... listed here:http://www.trend-interior.ru/catalog/stulya-italiya/ sylvester.html turbosmus not collapsed, the sweep is.
thingiverse
free
Saint Sylvester by GeoffreyMarchal
...ral saint-rombaut in mechelen, demolished in 1664.
for more updates, please consider to follow me on twitter at @geoffreymarchal.
Cat
3d_export
$26
Cat
...cat
3dexport
cat
3d_export
$6
Cat
...cat
3dexport
cat
3d_export
$6
cat
...cat
3dexport
this is a cat
3d_export
$5
Cat
...cat
3dexport
cat
3d_export
$5
Cat
...cat
3dexport
cat
3d_export
$5
cat
...cat
3dexport
low poly cat ball
archibase_planet
free
Cat
...cat
archibase planet
cats animals
cat n140208 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$5
cat
...cat
3dexport
a cat that may look like a leopard because of its color.
turbosquid
free
Tidy Cats Cat Litter
...alty free 3d model tidy cats cat litter for download as blend on turbosquid: 3d models for games, architecture, videos. (1206013)
turbosquid
$15
The Battle Cats Cat Base
...odel the battle cats - eraser cat for download as max and ige on turbosquid: 3d models for games, architecture, videos. (1591322)