Thingiverse
Swivel v2 by cooasty
by Thingiverse
Last crawled date: 3 years, 1 month ago
Used PLA @ 195. Table @ 0. Printed 80% 0.10,3,3,3 for body parts
Printed 80% 0.15,3,3,3 for end pieces
I slowed the print speed 20-50% when printing the delicate portions of the body's. Speed depends on how many items that are being printed at the same time. Jello action will not provide a good print.
Remove the built in rafts from the swivel bodies and cleaned up for a smooth fit. 3-1 oil helps. Female end has a built in raft under the top that stays in place. It looks ugly during the print, but finishes up nicely.
Prong half of the swivel can be easily removed for a second shot at the fit up. Once everything fits nicely, crazy glue the ends of your choice. You will have to break a prong to get it apart once glued.
V2 swivel body parts will interchange with the V1 version. However, V2 body parts have about 1.0 mm larger outside diameter. All V2 end parts are 4 mm thick. PLA will mold easily with hot water if so desired.
A swivel with two loop ends held 41.6 lbs, before a prong broke. Carabiner's will hold around 40#. Your results may vary.
Modified fish carabiner is from http://www.thingiverse.com/thing:235871 V2 has a better hinge action.
Let me know if you want a special end or give SketchUp a try and shoot me a note with your results.
MOKO Mini Pulley v2 Conversion Kit http://www.thingiverse.com/thing:1279779
MOKO Mini Pulley v2 http://www.thingiverse.com/thing:1275348
Printed 80% 0.15,3,3,3 for end pieces
I slowed the print speed 20-50% when printing the delicate portions of the body's. Speed depends on how many items that are being printed at the same time. Jello action will not provide a good print.
Remove the built in rafts from the swivel bodies and cleaned up for a smooth fit. 3-1 oil helps. Female end has a built in raft under the top that stays in place. It looks ugly during the print, but finishes up nicely.
Prong half of the swivel can be easily removed for a second shot at the fit up. Once everything fits nicely, crazy glue the ends of your choice. You will have to break a prong to get it apart once glued.
V2 swivel body parts will interchange with the V1 version. However, V2 body parts have about 1.0 mm larger outside diameter. All V2 end parts are 4 mm thick. PLA will mold easily with hot water if so desired.
A swivel with two loop ends held 41.6 lbs, before a prong broke. Carabiner's will hold around 40#. Your results may vary.
Modified fish carabiner is from http://www.thingiverse.com/thing:235871 V2 has a better hinge action.
Let me know if you want a special end or give SketchUp a try and shoot me a note with your results.
MOKO Mini Pulley v2 Conversion Kit http://www.thingiverse.com/thing:1279779
MOKO Mini Pulley v2 http://www.thingiverse.com/thing:1275348
Similar models
thingiverse
free
MOKO Mini Pulley v2 Conversion Kit by cooasty
...ginal moko mini pulley can be found here: http://www.thingiverse.com/thing:153197
carabinerminiv2 is a upgrade from deleted v1
thingiverse
free
MOKO Mini Pulley v2 by cooasty
...ulley v2 conversion kit can be found here:http://www.thingiverse.com/thing:1279779
carabinermini.v2 is a upgrade from deleted v1.
thingiverse
free
Carabiner V2 by haqnmaq
...ingiverse.com/thing:3131
v2 allows easier printing, and the clasp is in-line with the rest of the body. makes a great keychain!!!
thingiverse
free
MOKO Block & Tackle Pulley by Moko
... load
assembly & demonstration video: http://youtu.be/wrv7vyy9rsm
see moko mini pulley for matching attachments & more!
thingiverse
free
Cablechain connector to 2040 Z rod holder by Ludicer
... on the other end to https://www.thingiverse.com/thing:2544052
v2 is printable without rafts and fits/sticks better to the frame.
thingiverse
free
Bottle Clip/Holder with Carabiner by karlboll
...clip but the original file is here ; https://www.thingiverse.com/thing:2539915
i print both at the same time, takes about 20 min.
thingiverse
free
40t abec 11 inset by mccloed
...ittle like the aluminum pulleys sold by www.diyelectricskateboard.com
print with a raft but no supports. i built the supports in.
thingiverse
free
BuMat Spool fitting by Renierm
...no need to remove the brim afterward.
i left the construction lines in place inside the .dxf file if you want to edit the part.
thingiverse
free
The Ultimate Carabiner 1.0 by JerGoff
....
you can now print my new carabiner! the ultimate carabiner v2 http://www.thingiverse.com/thing:1148658
share, print and enjoy.
thingiverse
free
X Motor mount for Anet A8 - pulley bracket by toosha
...for a tighter fit.
v2- accommodates m4x35
complete assembly with further improvements:https://www.thingiverse.com/thing:2869129
Cooasty
thingiverse
free
Electrical Switch Blank by cooasty
...giverse
switch blank for electrical plate.
a better print will result with the part going into the plate is printed @ 50% speed.
thingiverse
free
Thermometer Leg by cooasty
...ometers have the dial held in place with the cover. remove cover and add hold down leg. may need to scale for your thermometer.
thingiverse
free
Cam Case - Arducam 8 mp by cooasty
...ce cam board. use spacer 1, add glass & lock all together with spacer 2.
used 5mm nut & bolt for knob or go pro hardware.
thingiverse
free
Olive Tong by cooasty
...olive tong by cooasty
thingiverse
olive tong
thingiverse
free
Switch Blade by cooasty
... nuts.
squared up trigger faces with a small file.
remix of a great design by icysugar.
https://www.thingiverse.com/thing:2972899
thingiverse
free
Battery Workbench by cooasty
...h by cooasty
thingiverse
for use with aa & aaa batteries
probe holder may be modified with heat.
may glue to base of tester.
thingiverse
free
Klapotetz by Michaelmi782
...a video here:https://youtu.be/cqovzbifr9y if you need additional blades visit:http://www.thingiverse.com/thing:1498345 cooasty made a lot different shapes you can use. have...
thingiverse
free
Super Duper Pooper Scooper by cooasty
...n plate to shape the end.
need to glue side reinforcement on for added strength.
remix: https://www.thingiverse.com/thing:113835
thingiverse
free
Fairy Table & Stool by cooasty
...fairy table & stool by cooasty
thingiverse
slowed print speed to 30% during table center support.
thingiverse
free
Fairy Mailbox by cooasty
...fairy mailbox by cooasty
thingiverse
scale for your needs.
Swivel
3d_export
$10
Swing Bolts DIN 444 M8 AutoCAD 2007 2010 3D Model
...eye bolt din444 fastener hardware sling swing industry supply swivel bolts lifting 9037fastener machine stainless eyebolts swing bolts din...
3ddd
$1
HOTBATH FRIENDO006
...friendo006 3ddd смеситель , hotbath washbasin mixer with high swivel spout without...
cg_studio
$10
office chair3d model
...office chair3d model cgstudio office chair swivel realistic modern furniture home house interior misc seat contemporary...
3ddd
$1
Dempsey Swivel Iron Bar Stool, Brown Leather
... подойдет для ваших интерьерных визуализаций как для крупных планов так и для средних.
поддержка: assaartem@gmail.com или в личку
3ddd
$1
LC8 swivel stool by Le Corbusier
... black)
- 100% real dimensions of object: 47 x 47 x 50 (h) cm
- open with 3ds max 2010-2013 or import in your favourite program
3ddd
$1
Domingo Salotti SUDEK
...domingo salotti , sudek sudek armchair by domingo salotti swivel armchair with completely removable cover. frame made of wood...
3ddd
$1
SWIVEL CHAIR SOHO SOFT TIN
...35kg/m³, frame: plywood, seat cover: bycast - polyurethan upholstery: pu foam, base: aluminiium
descripción: 90x79x52
ref. 76949
3ddd
$1
Eichholtz Chair Aero Left
...item no.: 110196 information: cameron deep turquoise fabric | swivel base dimensions: 56 x 66 x h. 72...
3ddd
$1
washbasin Nobili collection
...washbasin nobili collection 3ddd nobili 3-hole set chrome finish swivel spout aerator neoperl® m 22 x 1 flexible parigi®...
3ddd
$1
Seymour High Swivel Chair
...статочно изменить id материала.
стек turbosmooth не свернут.
в архиве: vray 3dsmax 2014, obj, текстуры, библиотека материалов.
V2
3d_export
$69
Female 01 3dpeople vol 02 v2 3D Model
...3d model
3dexport
female 3dpeople woman human body t-pose clothes
female 01 3dpeople vol 02 v2 3d model evermotion 82503 3dexport
3d_ocean
$9
HDRI Morning SunSet V2
...ojects. format: this file is in the following formats: hdr exr jpg resolution: this file is 4128×2083 pixels. it is 32 bit color.
3d_ocean
$9
HDRI Sunset V2
...jects. format: this file is in the following formats: hdr exr jpg resolution: this file is 10000×2500 pixels. it is 32 bit color.
3d_export
$10
Locker V2 3D Model
...al padlock indoor security middle
locker v2 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl firdz3d 113155 3dexport
3d_ocean
$15
Element3D - iPhone 6S
...apple’s iphone 6s model collection for video copilot’s element3d v2 in all 4 color...
3d_ocean
$12
Fest Amsterdam Windlicht Tangare Lantern v2
...m. it was modeled and prepared for photorealistic renderings, close-ups, cg visualization. the lantern model is ready to be in...
3d_ocean
$49
HDRI Collection V2
...kydome sun
12 hdri collection .hdr, exr, jpg format for use as environment in 3d scenes. resolution: each sky hdri is 4000px wide
cg_studio
$49
Old Man v23d model
...cter people topology polygroups
.ztl .obj - old man v2 3d model, royalty free license available, instant download after purchase.
cg_studio
$79
Female Anatomy v23d model
...ence polygroups basemesh
.obj .ztl - female anatomy v2 3d model, royalty free license available, instant download after purchase.
3ddd
$1
Стена из листьев плюща v2
... примерный размер: 2500*5000мм
max2011+fbx
1,863,372 - polys
1,205,024 - verts
пойдет как для экстерьера так и для интерьера.