Switch Lables by 3DPrinterMaster66

...k8200 z switch screw upgrade by twisteddaylight thingiverse better/easier to adjust holder for the k8200 z-switch screw

...wanted a way to prevent my outside lights from being switched off. a longer screw will be needed to screw into the light fixture.

...thingiverse another switch pedal, but smaller (100x 50 mm aprox). requires an endstop switch, two m2.5 screws and two m3 screws.

... electrical outlet that you need to stay on. it will screw on using the screw on the panel cover and keep the switch from moving.

...switch body length: 11 mm switch body width: 6 mm switch body height: 8 mm distance between screws: 15 mm switch body width: 6 mm

...r geeetech acrylic by greg13100 thingiverse support for switch. geeetech i3 acrylic switch 2.80cmx1.20cm just change the screws.

...ingiverse this is a simple smart bulb switch lockout. it mounts to one screw on the switch plate. it will print with no support.

...l-micro-switch-limit-switch-kw-10-a-micro-switch-stalk-push-button-switch/887159400.html 25mm m3 screw and m3 wing nut to tighten

...e plate. screw the plate to the wall with original switch screws. then fit the sonoff switch to the plate adapter with m3 screws.

...2x wood screws m 1.7x10 this is fitting to switches with distance betwen screws of 10mm stay tuned for easy adjustable version !

...is a camera cover that slides open and shut. you will need to glue it to your computer and make sure it slides well before glued.

...ery/evnovo sidewinder 1x by 3dprintermaster66 thingiverse this is a quarter scale replica of the artillery/evnovo sidewinder 1x.

...intermaster66 thingiverse this is a 2 part soap dish with an angled bottom that angels to a drain hole so the water could drain.

...ngiverse this is a straw holder to hold the straw on spray cans. it just slides over the can and there is three different sizes.

...ort by 3dprintermaster66 thingiverse this is a part that you could print for your sidewinder 1x to support the cord on the back.

...p has the dirt and plant with holes in the bottom large enough for water to get in but small enough that dirt won't fall out.

...5mm, 0.5mm, 0.25mm, 0.15mm, 0.05mm accuracy test: 20 x 20 x 20mm cube overhang test: 35°, 45°, 55°, 65° bridging test string test

...ftc warning lable thingiverse ftc warning lable

...deep drawer with lable by dganite thingiverse i wanted a drawer with a placeholder for a lable, but i also wanted it to be deep.

...right brain ux1 lable by tb6009 thingiverse right brain ux1 lable

...photo holder with interchangeable lables by bugalugs thingiverse small photo holder with interchangeable lables

...spresso capsule honeycomb snowflake wall holder made by antohneeo, published dec 15, 2014https://www.thingiverse.com/thing:593717

...r3dk labl 004 by r3dk thingiverse "business card"

...tire valve lables thingiverse changed to rf, lf, rr, lr, and made 'stencil' letters to keep the letters complete.

...e things more uncomplicated, right? :) 4 mm tunnel to fit cables of some 4.5 mm (usb) but it may be resized to whatever you need.

...before the seeds start growing and you can recognise them. i printed them in white so as to reduce incidences of treading on them

...plin.co.uk/slim-line-rocker-switch-98091 led switch is n85jz http://www.maplin.co.uk/12v-illuminated-rocker-switch-218983

...switch thingiverse small toggle switch to be used in movie props, for example aerospace cockpit panels.

...switch panel for 3 switches by thebaseddoge thingiverse fits 3 20x12 switches

...switch holder toggle switch by zipcode thingiverse holder for a small on/off toggle switch.

...handlebar switch thingiverse handlebar switch for a 22mm handlebar. uses m5 bolts and a standard switch.

...2020 switch thingiverse this is a switch holder that can be put in a 2020 profile the hole for the switch is 12x20mm

...turret switch thingiverse casing switch

...switch romote thingiverse switch romote

...stove switch thingiverse stove switch

...switch by sobottra thingiverse switch extended