Thingiverse
Switch Box for small 12V Switches by Oretz
by Thingiverse
Last crawled date: 4 years, 3 months ago
This is a Box, I needed to fit three small 12V Switches inside.
The Holes for the switches are 20mm x 13mm big.
It can be wall mounted with two holes at the bottom.
Cables can be inserted through the hole on the side.
I used short M4 screws to close the lid.
The Holes for the switches are 20mm x 13mm big.
It can be wall mounted with two holes at the bottom.
Cables can be inserted through the hole on the side.
I used short M4 screws to close the lid.