Thingiverse
Swiss Army Knife Style Keyring - sunken nuts Hex M3 / bolts M3 x16 by JSvdB
by Thingiverse
Last crawled date: 4 years, 6 months ago
This is a remix of 'Swiss Army Knife style keyring', a very elegant and compact key holder. A beautiful design and good to print.
(http://www.thingiverse.com/thing:1820481)
I modified the design just a little so that the bolts (M3) and nuts (M3 x 16 mm.) are both of the same size and sunken in the surface.
The part with the nuts has been thickened by 0.4 to keep the nuts from getting through the hole.
The part with the bolts is not thickened to keep the keyring as thin as possible.
Without washers it can hold 5 keys.
(http://www.thingiverse.com/thing:1820481)
I modified the design just a little so that the bolts (M3) and nuts (M3 x 16 mm.) are both of the same size and sunken in the surface.
The part with the nuts has been thickened by 0.4 to keep the nuts from getting through the hole.
The part with the bolts is not thickened to keep the keyring as thin as possible.
Without washers it can hold 5 keys.