Thingiverse
Surgical Mask Strap for Lasercutting (K40 and Whisperer) by Cka1ser
by Thingiverse
Last crawled date: 5 years, 4 months ago
Based on https://www.thingiverse.com/thing:4249113
I recreated the design for use with the K40 laser cutter and K40 Whisperer. 9 pieces are fitted into the stock K40 working area.
I cut it from 1.6mm opaque acrylic material which has proven to be flexible and strong enough.
I run the K40 at 10 mm sec and aprox. 10 mA.
With that settings 50 to 60 pieces per hour are easily made. Higher current and feed could push that numbers, but I did not try yet.
I recreated the design for use with the K40 laser cutter and K40 Whisperer. 9 pieces are fitted into the stock K40 working area.
I cut it from 1.6mm opaque acrylic material which has proven to be flexible and strong enough.
I run the K40 at 10 mm sec and aprox. 10 mA.
With that settings 50 to 60 pieces per hour are easily made. Higher current and feed could push that numbers, but I did not try yet.