Thingiverse
Support Rod Retainer - Toyota (90959-01136) by Houhry
by Thingiverse
Last crawled date: 4 years, 10 months ago
works the same as this: https://www.thingiverse.com/thing:2633948
for TOYOTA MRS/MR2 spyder ZZW30
I tried his model and it cracked when tried to put the rod in (thx for sharing btw), so I created mine.
it's a lot more flexible so it doesn't crack that easily:)
Print flat side down, 100 fill and thick wall.
check the layers all material should be printed as "WALL" (no zigzags)
rod diameter: 8mm
chassis cutout size: 11.4 x 7mm
for TOYOTA MRS/MR2 spyder ZZW30
I tried his model and it cracked when tried to put the rod in (thx for sharing btw), so I created mine.
it's a lot more flexible so it doesn't crack that easily:)
Print flat side down, 100 fill and thick wall.
check the layers all material should be printed as "WALL" (no zigzags)
rod diameter: 8mm
chassis cutout size: 11.4 x 7mm