Thingiverse
Super X 125mm FPV racer conversion kit by acefx
by Thingiverse
Last crawled date: 3 years ago
[RELEASED] V2.2 frame, Big change to compensate resonance in the frame, Needed 2XM2 screw
[BETA] : For those with older SuperX frame (arm and plate in 1 piece)
i've made the V2.2 base frame with arms and screws. But untested feel free to give some returns.
After many weeks of testing, here the V1.2 Fpv racer printable kit to convert your super-X 125mm to a stunning fpv racer.
Great agility, and a lot of fun !
The frame had been designed for Fpv race, the flat bottom and shape let you make your turn without yawing, making the quad acting like a plane when getting speed.
Compatible with stock lipo for 5 minutes race.
Also compatible with 350mah to 750mah nanotech ultra flat lipo pack.
The Camera pod is designed for the 1gr camera you can find herehttp://fpvhobby.com/83-1-gram-nano-camera.html
or maybe many other place on the web.
Video TX is this one:http://www.fpvhobby.com/229-new-mini-58-ghz-avtx-for-fatshark-.html
But compatible with any same form factor emiter.
Since we are in 1S battery pack, you need a 5V step-up
you can find it anywhere on the web
With the 350 nanotech batt, the complete quad is 63gr
[BETA] : For those with older SuperX frame (arm and plate in 1 piece)
i've made the V2.2 base frame with arms and screws. But untested feel free to give some returns.
After many weeks of testing, here the V1.2 Fpv racer printable kit to convert your super-X 125mm to a stunning fpv racer.
Great agility, and a lot of fun !
The frame had been designed for Fpv race, the flat bottom and shape let you make your turn without yawing, making the quad acting like a plane when getting speed.
Compatible with stock lipo for 5 minutes race.
Also compatible with 350mah to 750mah nanotech ultra flat lipo pack.
The Camera pod is designed for the 1gr camera you can find herehttp://fpvhobby.com/83-1-gram-nano-camera.html
or maybe many other place on the web.
Video TX is this one:http://www.fpvhobby.com/229-new-mini-58-ghz-avtx-for-fatshark-.html
But compatible with any same form factor emiter.
Since we are in 1S battery pack, you need a 5V step-up
you can find it anywhere on the web
With the 350 nanotech batt, the complete quad is 63gr
Similar models
thingiverse
free
Hubsan H107C X4 FPV Racer Frame 110 by Hackbert
...h-600mah
1x hubsan h107c x4 (electronic)
4x m3 nylon screws
1x fpv camera fx797t 3-in-1 super mini 5.8g 40ch av video transmitter
thingiverse
free
Fpv 130 nano quad racer by alex12150
...arbest.com/multi-rotor-parts/pp_203073.html
don't forget to install ubec 5v 3a http://www.gearbest.com/rc-parts/pp_88921.html
thingiverse
free
Mini FPV Racing Quad Lipo Battery skid by The_Wizard
...mini fpv racing quad lipo battery skid by the_wizard
thingiverse
mini fpv racing quad lipo battery skid.
print in tpu
thingiverse
free
Yelo 125mm frame insta360 go mount by meganillo
...5mm-2_5mm-arm-2_5-inch-carbon-fiber-toothpick-frame-kit-for-rc-drone-fpv-racing-p-1544265.html?rmmds=myorder&cur_warehouse=cn
thingiverse
free
Micro FPV Quad-racer 2S 90mm polycarbonate by Microdure
...lat top cover larger and larger and compatible with the greatest receivers is being prepared.
https://www.facebook.com/microdure/
thingiverse
free
Lipo Protector Roboterking 210 FPV Racer by KopterCrew
...://www.koptercrew.de/tipps-tricks/roboterking-210-fpv-racer-lipo-und-antennenschutz/
designd by our crew members stefan and peter
thingiverse
free
eachine 1000 tvl camera holder for fpv racer quad by PrinzTom
...ad by prinztom
thingiverse
adjustable holder for the eachine 1000 tvl ccd camera, suitable for the lisam ls 210 fpv racer frame.
thingiverse
free
FrenZy FPV Racing Frame Printables
...ingiverse
most parts for the frenzy fpv racing frame. https://flyingrobot.co/collections/frames-1/products/frenzy-race-frame-kit
thingiverse
free
RACER X FPV MUTANT4 arm guards
...racer x fpv mutant4 arm guards
thingiverse
official racer x fpv mutant4 arm guards
thingiverse
free
RACER X FPV Twiglet arm guards
...racer x fpv twiglet arm guards
thingiverse
official racer x fpv twiglet arm guards
Acefx
thingiverse
free
LittleBee 20A protector by acefx
...littlebee 20a protector by acefx
thingiverse
remix from jvisser design for the littlebee 20a,
nothing more !
thingiverse
free
MPX Twinstar FPV POD by acefx
...mpx twinstar fpv pod by acefx
thingiverse
simple fpv pod for the multiplex twinstar
great fpv platform
thingiverse
free
Malyan M180 / Freesculpt EX2 Bed leveling template by acefx
...malyan m180 / freesculpt ex2 bed leveling template by acefx
thingiverse
bed leveling template
thingiverse
free
ZMR 250 - Sharkpod© - Antenna Holder by acefx
...ntenna holder by acefx
thingiverse
sharkpod© antenna holder adaptation for zmr250
nothing else to say, print it without support.
thingiverse
free
Nano-QX FPV antenna saver by acefx
...hingiverse
inspired from a deleted design with mod on the v3 to prevent the antenna saver to slip to far into the va1100 camera.
thingiverse
free
Super X Half moon feets by acefx
...giverse
new feet for our super x / superx fpv ( http://www.thingiverse.com/thing:820143 )
tough and stylish ;)
just clip it !
thingiverse
free
FPV Goggles Battery Clip by acefx
...or your fpv goggle battery
fits any battery
just stick it to your pack with a double sided tape
compatible with any fpv google !
thingiverse
free
Nighthawk PRO 280 feet by acefx
... aluminium spacer with these plastics one.
/!\ carefull, there is front and rear ones, the rear goes by pair to hold the led bar.
thingiverse
free
BB4 - Badbird - Side Panel by acefx
... bb4 250.
with some large air intake to cool down the vtx and board.
designed for supportless printing.
released by propxl design
thingiverse
free
Universal Spektrum Satellite Foldable Holder. by acefx
...pektrum satellite.
it just clips on it !
usable on model of any kind !
inspired from :http://www.thingiverse.com/thing:23708
125Mm
thingiverse
free
Ventilator plug 125mm / Bouche de ventilation 125mm by ExaZ
...ventilator plug 125mm / bouche de ventilation 125mm by exaz
thingiverse
all in name.. :)
thingiverse
free
raccordo ventola / tubo da 125mm // fitting fan / pipe 125mm by matnello95
...bo da 125mm // fitting fan / pipe 125mm by matnello95
thingiverse
raccordo ventola / tubo da 125mm // fitting fan / pipe 125mm
thingiverse
free
Box Trennscheibe cutting disc 125mm by StiviKing
...box trennscheibe cutting disc 125mm by stiviking
thingiverse
box für 125mm trennscheibe cutting disc
box for 125mm cutting disc
thingiverse
free
Vent intake and outlet 125mm by marekl123
...vent intake and outlet 125mm by marekl123
thingiverse
inlet and exhaust outlet for 125mm vent systems. connect to vent hose.
thingiverse
free
Spannbacken Schraubstock 125mm by HenryFordFirst
...
thingiverse
hab mal ein paar neue spannbacken für meinen 125mm breiten schraubstock entworfen , hoffe sie helfen auch anderen .
thingiverse
free
Scheinwerfer Blende Deckel 125mm by Dantyrol
...scheinwerfer blende deckel 125mm by dantyrol
thingiverse
spare part - cover headlight front left/right peugeot 207 - 125mm
thingiverse
free
Sandpaper pads holder (125mm) by panWiadr0
...er pads holder (125mm) by panwiadr0
thingiverse
simple wall holder for 125mm pads. each section accomodate around 50-100 sheets.
thingiverse
free
125mm lents magnifying glass chassis by Antidote314
...s magnifying glass chassis by antidote314
thingiverse
this is a chassis for 125mm lents so you can use them as magnifying glass.
thingiverse
free
suction hose, Absaugschlauch Adapter Flansch 125mm
...chlauch adapter flansch 125mm
thingiverse
suction hose, absaugschlauch adapter flansch 125mm/126mm for kitchen
supports needed !
thingiverse
free
Cutting adapter for bosch 125mm grinder by Uroboros_PL
...r for bosch 125mm grinder by uroboros_pl
thingiverse
adapter for bosch angle grinder 125mm, for cutting 90 *, e.g. mdf, psb etc.
Racer
thingiverse
free
Bobbin Racer by fastkite
...bobbin racer by fastkite
thingiverse
bobbin racers are low speed, high torque obstacle racers.
thingiverse
free
Racer Cycle by Gangadhar
...racer cycle by gangadhar
thingiverse
racer cycle by ameya [created on 3dtin]
thingiverse
free
F1 Racer by Mbufkin
...f1 racer by mbufkin
thingiverse
f1 racer created by student at trussville midde schol
thingiverse
free
Speed Racer stencil by Longquang
...speed racer stencil by longquang
thingiverse
speed racer stencil
thingiverse
free
Dicey Racers car upgrade by thelibguy
...ken upgrade for the game dicey racers.
for more info on dicey racers, check out:https://www.thegamecrafter.com/games/dicey-racers
thingiverse
free
FIDGET RACER by ahines13
...fidget racer by ahines13
thingiverse
m
thingiverse
free
Speed Racer by WeldingEagle1
...speed racer by weldingeagle1
thingiverse
it is fast.
thingiverse
free
co2 Racer by burnaxel
...co2 racer by burnaxel
thingiverse
car
thingiverse
free
FOOT DRONE RACER by Hopson
...foot drone racer by hopson
thingiverse
pieds pour drone racer... vis et boulons taille 2.5mm
thingiverse
free
racer fpv 250 quadcoptere by sam2302
...racer fpv 250 quadcoptere by sam2302
thingiverse
250 fpv racer
Conversion
thingiverse
free
Converse keychain for Converse's fan by theletech
...converse keychain for converse's fan by theletech
thingiverse
please print in 0.15 or 0.2 for the best quality
thingiverse
free
Blockjacker arm conversion
...blockjacker arm conversion
thingiverse
a conversion for a giant robot. mirror to print l and r arms
thingiverse
free
Converse Shoes by spekdesign
...converse shoes by spekdesign
thingiverse
simple converse shoes (left + right) intended for small prints with minimal detail.
thingiverse
free
Conversation Hearts by PfLibrarian
...n hearts by pflibrarian
thingiverse
conversation hearts with three different candy heart phrases. great for valentine's day!
thingiverse
free
associated B4 conversion pancar
...associated b4 conversion pancar
thingiverse
associated b4 conversion pancar
thingiverse
free
Rotofury Elite Conversion by Hooliganblasterco
...rotofury elite conversion by hooliganblasterco
thingiverse
rotofury elite conversion, reversable
thingiverse
free
Conversation Hearts
... the heart instead of popped out. get creative if you like and fill the indents with paint or glitter and seal to make an impact!
thingiverse
free
Conversion Kit Box (Slide Conversion Kit) by Ziggi42
...nd tpu (buffers).
everything you have to know is in the readme.txt or look at print settings misc.
thanks and gimme a like!!!
sfo
thingiverse
free
BOOMBASTIC .22 CONVERSION by mussy
...boombastic .22 conversion by mussy
thingiverse
this is a .22 rim fire blank conversion... enjoy
thingiverse
free
20mm Fan conversion by fluxcore
...20mm fan conversion by fluxcore
thingiverse
conversion from a 20mm fan to a blower or extractor.......unfinished
Fpv
thingiverse
free
FpV Mount (SOPORTE FPV) by elborjas1987
...fpv mount (soporte fpv) by elborjas1987
thingiverse
this is a fpv mount with the same holes of naza base.
thingiverse
free
fpv by tbutera
...fpv by tbutera
thingiverse
fpv
thingiverse
free
fpv by tbutera
...fpv by tbutera
thingiverse
fpv
thingiverse
free
FPV DRONE ROOSTER DJI FPV PART
...fpv drone rooster dji fpv part
thingiverse
fpv drone rooster dji fpv install part
thingiverse
free
FPV monitor
...tml?rmmds=myorder&cur_warehouse=cn
link for download : https://cults3d.com/fr/mod%c3%a8le-3d/divers/fpv-monitor-ecran-fpv-faf
thingiverse
free
FPV receiver mount for FPV display by petrex
...eceiver mount for fpv display by petrex
thingiverse
aomway receiver mount for field view 777 fpv monitor. with small cable tray.
thingiverse
free
dji fpv rush fpv antenna mount spaceone fpv universal by husyildiz
...r original
rush fpv antenna mmx
at cura or prusa slicer please cut-off 0,5 mm maybe less at downside for no support printing !!!!
thingiverse
free
Camera FPV Quanum DIY FPV by emoleo
...camera fpv quanum diy fpv by emoleo
thingiverse
holding the camera for a drone
thingiverse
free
fpv goggles by pmalvino
...fpv goggles by pmalvino
thingiverse
fpv goggles
thingiverse
free
fpv gears by tbutera
...fpv gears by tbutera
thingiverse
fpv gears
Super
thingiverse
free
super by boopathin68
...super by boopathin68
thingiverse
super
thingiverse
free
Super Mario - Super Crown by fox-hound64
...super mario - super crown by fox-hound64
thingiverse
just my design of a super crown from super mario.
thingiverse
free
SUPER A
...super a
thingiverse
have not tested out yet.
thingiverse
free
SUPER BOWL, bowl for Super Bowl
... solution for your snacking needs in this great time. i am of course referring to the super bowl.
just print it.
thank me later.
thingiverse
free
super oloid
...super oloid
thingiverse
i called it this because it's super and ive never seen anything like this before
thingiverse
free
Super Rang by tharu
...super rang by tharu
thingiverse
super rang
thingiverse
free
Super Minion by Lumberjack16
...super minion by lumberjack16
thingiverse
super minion.
thingiverse
free
Super Snowman by magicstick
...super snowman by magicstick
thingiverse
super snowman
thingiverse
free
Super Jarv by sofrenchic
...super jarv by sofrenchic
thingiverse
super jarv
thingiverse
free
Super Jarv by sofrenchic
...super jarv by sofrenchic
thingiverse
super jarv
Kit
thingiverse
free
Kit Grappa - Kit Brandy by doctormao
...kit grappa - kit brandy by doctormao
thingiverse
kit grappa - kit brandy
thingiverse
free
AT-AT Kit Card by fresh1134206
...at-at kit card by fresh1134206
thingiverse
at-at kit card
thingiverse
free
Vixen Kit by eeprof
...vixen kit by eeprof
thingiverse
vixen kit
thingiverse
free
Sleeve Bonza Kit
...sleeve bonza kit
thingiverse
sleeve bonza kit
thingiverse
free
Fort Kit by MrWatermelon769
...fort kit by mrwatermelon769
thingiverse
fort kit for kids
thingiverse
free
Upholstery removal kit
...upholstery removal kit
thingiverse
upholstery removal kit
thingiverse
free
Organize Kit by Teobaldo
...organize kit by teobaldo
thingiverse
configure the organize kit with parameters.
thingiverse
free
sewing kit by ackee123
...sewing kit by ackee123
thingiverse
key fob that contains a sewing kit.
thingiverse
free
Column Kit by
...column kit by
thingiverse
you know...
thingiverse
free
Rocket Kit by IDEMLyon
...rocket kit by idemlyon
thingiverse
a little rocket kit to start using laser cutter.