Super Slim Carriage for Hypercube X & Y parts by Aurion55

Last crawled date: 3 years ago

20-07/2018 X Carriage aligned holes in a row.
18/07/2018 X Carriage alter 1 nut not square to body.
12/07/2018 added new X flag.
02/07/2018 add missing clamp, add new 30 to 40 mm fan adapter & shroud.
A slim down version base of the "Hypercube 300 CoreXY".
Have reduce the width X Carriage down 38.5mm, this allow more X movement.
Add Optical sensor switch and new X Flag to X carriage.
Redesign the Belt system with a return loop of the belt and then insert a steel pin from and old coat hanger.
Also make new Belt clips, design the same above with insert of steel pin. ( cut pin to 10 mm, file the ends, so it fit properly).
Re-design of Fan Part Cooler which blows cold air at the part at 20 degrees angle, (Thanks to Cmwwebfx on Thingiverse).
Add Y Axis Optical Sensor switch, which I've included a reverse-able bracket.
30/06/2018 Add Fan duct for sock, if you happen to have a sock on the extruder block.