Thingiverse
![Super Bee Entrance by sarbalyd](/previews/8562336.jpg)
Super Bee Entrance by sarbalyd
by Thingiverse
Last crawled date: 3 years, 2 months ago
This is a luxury entrance for bee hives. Its intended to go on the super as entrances in the super are meant to increase honey yields by making it easier for the returning bees to access the supers. Not sure if this is the case or not so is a bit of an experiment. I will find out this spring and if the bees actually use it!
The entrance has a roof over the entrance to prevent rain ingress and a landing pad to assist the bees, but angled to allow water to drain away from the hive.
The doors can be opened and allow you to adjust the entrance hole size. They can be closed in case of robbing.
The pointed base is intended to direct the bees to the ledge if they are climbing up the hive.
Can be unclipped from the hive and blanking plate placed over the super hole when transporting if required.
This is printed in fluorescent yellow but only because that was the colour I had loaded at the time and not for any bee specific reason.
Dimension of landing pad is max 60mm wide, with approximate 40mm wide x 8mm high entrance slot.
It's fitted to my poly hive super in the photo.
Print two doors, and fit them in the slot before you attach the entrance to the hive.
Would be interested to hear beekeeping comments on it.
Update note - Some bees use it, although most prefer the bottom entrance. it may result in more pollen in the super. I may re work the design when i get a chance so super entrance becomes a pollen collector also.
The entrance has a roof over the entrance to prevent rain ingress and a landing pad to assist the bees, but angled to allow water to drain away from the hive.
The doors can be opened and allow you to adjust the entrance hole size. They can be closed in case of robbing.
The pointed base is intended to direct the bees to the ledge if they are climbing up the hive.
Can be unclipped from the hive and blanking plate placed over the super hole when transporting if required.
This is printed in fluorescent yellow but only because that was the colour I had loaded at the time and not for any bee specific reason.
Dimension of landing pad is max 60mm wide, with approximate 40mm wide x 8mm high entrance slot.
It's fitted to my poly hive super in the photo.
Print two doors, and fit them in the slot before you attach the entrance to the hive.
Would be interested to hear beekeeping comments on it.
Update note - Some bees use it, although most prefer the bottom entrance. it may result in more pollen in the super. I may re work the design when i get a chance so super entrance becomes a pollen collector also.
Similar models
thingiverse
free
![Bee Feeder for inside Hive by sat481](/t/8534653.jpg)
Bee Feeder for inside Hive by sat481
...jar and refill the jar every few days. you could print several to fit in the hive to save regular fill ups.
print with supports.
thingiverse
free
![Bee Hive Entrance Reducer by runner409](/t/8628022.jpg)
Bee Hive Entrance Reducer by runner409
...o two pieces so that it can be printed on more printers (you need at least 7 inches in one direction unless you make it smaller).
3dwarehouse
free
![Modified Warré sump box floor - Mk2](/t/10168624.jpg)
Modified Warré sump box floor - Mk2
...lar entrance hole is my personal preference as it better replicates a natural tree entrance and is easier for the bees to defend.
thingiverse
free
![Beehive Entrance Reducer - lockable by vremebg](/t/10253670.jpg)
Beehive Entrance Reducer - lockable by vremebg
...imply insert the pin and the entrance will be closed.
also, added holes for ventilation of the hive while closed. very important!
thingiverse
free
![Mason Jar(regular mouth)Bee Feeder. by BroWorks](/t/9228098.jpg)
Mason Jar(regular mouth)Bee Feeder. by BroWorks
... filament.
you will need to heat up a paper clip wire and melt the holes where the canning jar sits because close when it prints.
thingiverse
free
![Beehive robbing preventer](/t/4667419.jpg)
Beehive robbing preventer
...r holes.
don't use this to cover bottom entrance!
(sorry, will add photos later, all of them are already outside on the hive)
thingiverse
free
![National Beehive Mouse Guard by Bubbason](/t/10253727.jpg)
National Beehive Mouse Guard by Bubbason
...e it prints completely flat.
once printed, clean off any rough edges and screw to your hive entrance using 8mm screws. enjoy! :)
thingiverse
free
![Layens bee hive entrance cover by SnakeJayd](/t/9673696.jpg)
Layens bee hive entrance cover by SnakeJayd
...re it is in action:https://youtu.be/0f2spzeked8
printing:
it is wide and flat, so no support needed.
i printed them at 15% infil.
thingiverse
free
![FT Super Bee camera mount for PZ0420 by mad_milchmann](/t/8613993.jpg)
FT Super Bee camera mount for PZ0420 by mad_milchmann
...ded more narrow screw holes for samller boards.
it is a bit wide for the kit version of the super beee, but you can squuez it in.
thingiverse
free
![Australian stingless bee hive door by CTBuxton](/t/8238264.jpg)
Australian stingless bee hive door by CTBuxton
... for a stingless bee hive, the spacing of the screw holes and portal fit the beehive designed by nick at australiannativebee..com
Sarbalyd
thingiverse
free
![Spool holder by sarbalyd](/t/8728379.jpg)
Spool holder by sarbalyd
...er spool holder on thingiverse. each spool holder is designed to take two 608zz bearings, and fits in the anet a8 spool support.
thingiverse
free
![Draining rack by sarbalyd](/t/8728387.jpg)
Draining rack by sarbalyd
...200 print bed.
could probably also be used for a cake cooling tray.
print the rack upside down.
you might need to rotate the stl.
thingiverse
free
![Citrus Juicer by sarbalyd](/t/8728258.jpg)
Citrus Juicer by sarbalyd
...ion on thingiverse already (https://www.thingiverse.com/thing:400916) but i had a go at designing one from scratch in fusion 360.
thingiverse
free
![Fridge Magnet by sarbalyd](/t/8728271.jpg)
Fridge Magnet by sarbalyd
...designed it as i had some small bits of filaments and some 4mm x 15 mm circular neodymium magnets (easily ordered through ebay).
thingiverse
free
![Marble machine post by sarbalyd](/t/8728226.jpg)
Marble machine post by sarbalyd
...lly. the hole in the adaptor should fit a fisher tecnic rod.
example of the powered version is here;https://youtu.be/bcqbvbjjk0k
thingiverse
free
![Plant support finial by sarbalyd](/t/8728382.jpg)
Plant support finial by sarbalyd
...igned in fusion360.
update : april 2018.
i printed in pla and can confirm its lasted a whole season and winter in the uk weather
thingiverse
free
![Replacement cooling fan blades by sarbalyd](/t/8588132.jpg)
Replacement cooling fan blades by sarbalyd
...ue. as the central boss is separate you should be able to modify it to fit different models of fan.
i designed it in fusion 360.
thingiverse
free
![67mm Lens Cap Holder by sarbalyd](/t/8651268.jpg)
67mm Lens Cap Holder by sarbalyd
...at.
uploaded model version isn't customised with my daughters name, unlike the version in the photo.
created in fusion 360.
thingiverse
free
![Torch Mount by sarbalyd](/t/8107941.jpg)
Torch Mount by sarbalyd
... make it lower profile.
parts held together with 19mm m3 nut and bolt, and the base of the camera mount so torch can be removed.
thingiverse
free
![Fidget Spinner - 3 arm with bearings by sarbalyd](/t/8708594.jpg)
Fidget Spinner - 3 arm with bearings by sarbalyd
...u print so the outer part of the finger spinner are on the base.
print the button slowly with a brim
https://youtu.be/-j5b5dk9kzo
Bee
3d_export
free
![bee](/t/11890515.jpg)
bee
...bee
3dexport
bee model
3d_export
$5
![Bee](/t/12643591.jpg)
Bee
...bee
3dexport
bee with flower. rigged
archibase_planet
free
![Bee](/t/948867.jpg)
Bee
...bee
archibase planet
bee fly insect
bee n040914 - 3d model (*.gsm+*.3ds) for 3d visualization.
3d_export
$7
![Bee](/t/11385819.jpg)
Bee
...bee
3dexport
just a bee and a flower. separate parts (movable without bones). not centered
3d_export
$20
![bee](/t/11417977.jpg)
bee
...el bee, modeling in blender, texturing in substance painter, archive include low poly and high poly model, textures, bake, images
3d_ocean
$5
![Bee](/t/592828.jpg)
Bee
...bee
3docean
3d models animals bee insects and small animals
3d models, animals, insects and small animals
turbosquid
$105
![bee](/t/13245198.jpg)
bee
...bee
turbosquid
royalty free 3d model bee for download as obj on turbosquid: 3d models for games, architecture, videos. (1438776)
3d_export
free
![LowPoly Bee](/t/12759277.jpg)
LowPoly Bee
...lowpoly bee
3dexport
lowpoly bee
turbosquid
$29
![bee](/t/13523141.jpg)
bee
...alty free 3d model bee for download as c4d, obj, fbx, and 3ds on turbosquid: 3d models for games, architecture, videos. (1693929)
turbosquid
$10
![Bee](/t/13355602.jpg)
Bee
...alty free 3d model bee for download as c4d, 3ds, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1563269)
Entrance
turbosquid
free
![entrance](/t/13353159.jpg)
entrance
...uid
free 3d model entrance for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1206790)
3d_export
$5
![entrance](/t/11422814.jpg)
entrance
...entrance
3dexport
turbosquid
$49
![Entrance](/t/13505536.jpg)
Entrance
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$45
![entrance](/t/13392777.jpg)
entrance
...3d model entrance for download as max, max, max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1548839)
turbosquid
$10
![entrance](/t/13353164.jpg)
entrance
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$65
![entrance](/t/11417424.jpg)
entrance
...entrance
3dexport
simple rendering of the scene file
3d_export
$25
![Entrance 3D Model](/t/136759.jpg)
Entrance 3D Model
...entrance 3d model
3dexport
entrance
entrance 3d model theking985 6460 3dexport
3d_export
$5
![entrance door](/t/11731765.jpg)
entrance door
...entrance door
3dexport
double-leaf entrance door. perfect for both a private house and any building.
archive3d
free
![Entrance 3D Model](/t/1053772.jpg)
Entrance 3D Model
...ty shop main entrance
salon entrance n161011 - 3d model (*.3ds) for exterior 3d visualization.
3ddd
$1
![Classic Entrance](/t/632172.jpg)
Classic Entrance
...classic entrance
3ddd
входная группа
3d classic entrance model3d studio max 2009v-ray 1.5 sp5
Super
3ddd
free
![super impossible](/t/844779.jpg)
super impossible
...super impossible
3ddd
kartell , super impossible
cтул super impossible фирмы kartell
3d_ocean
$19
![Super market](/t/583855.jpg)
Super market
...ean
chain shop large super market 3d model low poly market low poly super market shop super market
low poly model of supermarket.
3d_export
$15
![super mario](/t/11891383.jpg)
super mario
...r mario.<br>superstar, super mario superhero.<br>сheerful and courageous.<br>new exciting adventures await him.
3d_ocean
$30
![Super Hero](/t/15480.jpg)
Super Hero
...hero mask ninja super hero sword zbrush
super hero created in zbrush 4.0 hero body—6 division levels 1.668 poly to 1.705mil poly.
3d_export
$25
![super promotion](/t/11714655.jpg)
super promotion
...super promotion
3dexport
3d_export
$5
![super sledge](/t/12639503.jpg)
super sledge
...super sledge
3dexport
...
3ddd
$1
![Longboard Super Sonic](/t/595811.jpg)
Longboard Super Sonic
...longboard super sonic
3ddd
лонгборд
longboard super sonic
turbosquid
$60
![Super Soldier](/t/13440598.jpg)
Super Soldier
...quid
royalty free 3d model super soldier for download as fbx on turbosquid: 3d models for games, architecture, videos. (1211725)
turbosquid
$60
![Super Soldier](/t/13440642.jpg)
Super Soldier
...quid
royalty free 3d model super soldier for download as fbx on turbosquid: 3d models for games, architecture, videos. (1207493)
turbosquid
$55
![Super Hero](/t/13403010.jpg)
Super Hero
...squid
royalty free 3d model super hero for download as blend on turbosquid: 3d models for games, architecture, videos. (1387035)