Stronger Corner Glass clips for FlashForge Creator Pro by LaurentRueil

Last crawled date: 3 years, 1 month ago

2 weeks ago, I bought a 3mm glass for my FlashForge Creator Pro 2016.
I made extra clips glass because I bought too small micro bender clips 16mm (http://www.thingiverse.com/thing:2070529)
Now, I wanted to add a system to have no movement of the glass on the bed (when the 2 heads system hit a clip by accident).
I found thathttp://www.thingiverse.com/thing:613685 by j herridge
But, I optimized it to have:
no support material needed (select the good orientation in slic3r or other)
smaller top size for my glass plate and the second one in plexiglass (2.6mm)
more stronger (no problem with a bed at 110°C)
I used the glass plate with Hairspray (Saint Aygue SYOSS Strong level 3 - very easy to remove when the plate is cold)
ABS
Printed at 0.2mm (first layer 0.3)
Solid Layer Top: 4, Bottom:4
Infill 30%
No skirt, no Brim
Files:
CornerClip_5.485mm.stl (just modified to not need support and stronger)
CornerClip_1.9mm.stl + smaller upper size for my Glass/Plexiglass
CornerClip_5.485mm.123dx for 123D Design
CornerClip_1.9mm.123dx for 123D Design
Special Thanks to DrLex for his help (slic3r settings for FFCP)