Stroller Cup Holder

Last crawled date: 4 years, 3 months ago

Background
My friend wanted a cup holder for his stroller but the ones that fit are expensive (~50 EUR). So I made one for him instead.
Design
Images don't show this, but the design is perforated with holes to let water out, but also to allow for the braiding of paracord into the design. This provides some dampening for the cup, and adds a stylish touch. I don't have any pictures of how the holder looks printed or with paracord, sorry, you'll just have to use your imagination. The holder works as-is, but may be a bit on the large side for most mugs. I wouldn't recommend using this holder with a mug without a lid, to avoid splashes.
The design allows for a wide range of angles thanks to the saw-toothed fastener.
Installation
Use machine screws and nuts of appropriate length and diameter. You'll need 3 screws and 3 nuts in total. We used M4 screws and nuts, which is what the design was made for, but M3 might also work.
Fasten the cup holder "Cage" to the mugside fastener using one screw and one nut. Remember to check the angle of oyur stroller and adjust the holder before tightening. You can then use two more screws and nuts to secure the holder to the stroller.