Thingiverse
![Strix Stratosurfer - Small Canopy by markqv](/previews/8581931.jpg)
Strix Stratosurfer - Small Canopy by markqv
by Thingiverse
Last crawled date: 3 years, 1 month ago
Finally finished up the small canopy shape for the Stratosurfer. There are two versions, one with a bolt on deck feature that fits my Pan and Tilts found on my Wiki here:
http://www.itsqv.com/QVM/index.php?title=Parts_Catalog_-_Pan_and_Tilt_Parts
The second option is simply a plain canopy that you can carve up to fit your needs.
Both have a bevelled edge, copied from the original foam cover, which helps them fit nice and snug into the foam base. They have ventilation ports that can also be used for headlights. There is a mount piece which screws down to the plywood deck and is tapped to M3 for the hold-down screws.
For more information on my Stratosurfer build, please see my build page here:
http://www.itsqv.com/QVM/index.php?title=Strix_StratoSurfer
Print Notes:
The canopy is designed to be printed right-side-up, as it sits on the plane.
The canopy shown in the pictures was printed in ABS at .2mm quality.
http://www.itsqv.com/QVM/index.php?title=Parts_Catalog_-_Pan_and_Tilt_Parts
The second option is simply a plain canopy that you can carve up to fit your needs.
Both have a bevelled edge, copied from the original foam cover, which helps them fit nice and snug into the foam base. They have ventilation ports that can also be used for headlights. There is a mount piece which screws down to the plywood deck and is tapped to M3 for the hold-down screws.
For more information on my Stratosurfer build, please see my build page here:
http://www.itsqv.com/QVM/index.php?title=Strix_StratoSurfer
Print Notes:
The canopy is designed to be printed right-side-up, as it sits on the plane.
The canopy shown in the pictures was printed in ABS at .2mm quality.
Similar models
thingiverse
free
![Mini Talon nose with/without pitot for Runcam Split Micro Pan/Tilt by CrunkleFloop](/t/8203185.jpg)
Mini Talon nose with/without pitot for Runcam Split Micro Pan/Tilt by CrunkleFloop
...ounting plates for the canopy can be downloaded from here - http://www.itsqv.com/qvm/index.php?title=mini_talon_parts_compilation
thingiverse
free
![Mini Talon Gopro Session mount for itsqv canopy.](/t/4755081.jpg)
Mini Talon Gopro Session mount for itsqv canopy.
...qv canopies (http://www.itsqv.com/qvm/index.php?title=parts_catalog_-_mini_talon)
printed in tpu - .2mm - on side with supports.4
thingiverse
free
![Strix StratoSurfer Parts v1 by markqv](/t/8596254.jpg)
Strix StratoSurfer Parts v1 by markqv
...e printed at 80% infil, all others are 20-40%
print orientation is dependent on printer/slicer set-up, please rotate if necessary
thingiverse
free
![Matek F405-wing top cover with BN-220](/t/4773631.jpg)
Matek F405-wing top cover with BN-220
....itsqv.com/qvm/index.php?title=parts_catalog_-_general_parts#matek_f405-wing_cover
i just made a cover for gps and test fit good,
thingiverse
free
![RunCam Split -v2- Simple Case by markqv](/t/8611803.jpg)
RunCam Split -v2- Simple Case by markqv
...; v2, please see my pan and tilt parts catalog here - http://www.itsqv.com/qvm/index.php?title=parts_catalog_-_pan_and_tilt_parts
thingiverse
free
![Runcam Eagle2 mount for itsqv static camera platform - Mini Talon by leeph](/t/8652018.jpg)
Runcam Eagle2 mount for itsqv static camera platform - Mini Talon by leeph
...the mini talon uav model aircraft.
see http://www.itsqv.com/qvm/index.php?title=mini_talon_parts_compilation#static_camera_mounts
thingiverse
free
![Mini Talon HS1177 Mount fot ItSQV.com Canopy by NorCAL3D](/t/8658426.jpg)
Mini Talon HS1177 Mount fot ItSQV.com Canopy by NorCAL3D
... had about 3mm of adjustment each way to get the front lined up with hte canopy, depending on what lense you have on your camera.
thingiverse
free
![X-UAV Mini Talon Parts v1 by markqv](/t/8822673.jpg)
X-UAV Mini Talon Parts v1 by markqv
...fpv_model
designed and printed in pla
more mini talon parts!http://www.itsqv.com/qvm/index.php?title=mini_talon_parts_compilation
thingiverse
free
![X-UAV Mini Talon Parts v3 by markqv](/t/8805008.jpg)
X-UAV Mini Talon Parts v3 by markqv
...title=mini_talon_x-uav_build_number_2
more mini talon parts!http://www.itsqv.com/qvm/index.php?title=mini_talon_parts_compilation
thingiverse
free
![X-UAV Mini Talon Parts v3 by markqv](/t/8779729.jpg)
X-UAV Mini Talon Parts v3 by markqv
...to angle the mount at 4 degrees down.
more mini talon parts!http://www.itsqv.com/qvm/index.php?title=mini_talon_parts_compilation
Stratosurfer
thingiverse
free
![Strix Stratosurfer canopy by tfmccull](/t/8714219.jpg)
Strix Stratosurfer canopy by tfmccull
...se with m3 hardware. optional support stl for additional bracing/mounting options. opening for sma connector on left side. enjoy!
thingiverse
free
![Stratosurfer Motor Pod by Bdillahunty](/t/8669892.jpg)
Stratosurfer Motor Pod by Bdillahunty
...mprove performance, make it easier to assemble in the field, and improve durability. print with >40% infill with 1.6mm shells.
thingiverse
free
![Strix Stratosurfer camera mount by tfmccull](/t/8733337.jpg)
Strix Stratosurfer camera mount by tfmccull
...other cam with a standard 1/4" mount. thin layer of goop or similar on the top will prevent the camera from slipping around.
thingiverse
free
![Stratosurfer FPV + session canopy by aalbinger](/t/8696856.jpg)
Stratosurfer FPV + session canopy by aalbinger
...known to work.
as with all gopro mounts make sure that area is strong enough to hold up as the gopro hinge is pretty darned thin.
thingiverse
free
![Stratosurfer GPS Mount by AxionZ](/t/8307381.jpg)
Stratosurfer GPS Mount by AxionZ
...urfer.https://www.readymaderc.com/products/details/rmrc-mini-gpshttps://www.racedayquads.com/products/micro-ublox-m8n-gps-glonass
thingiverse
free
![Stratosurfer Horizontal Tail Support by AxionZ](/t/8300097.jpg)
Stratosurfer Horizontal Tail Support by AxionZ
...e6000 or equivalent adhesion material.
-pick up hole on fuselage and install m3 mount bolt through fuselage and into the support.
thingiverse
free
![STRIX StratoSurfer Motor Mount by xtrmtrk](/t/8732673.jpg)
STRIX StratoSurfer Motor Mount by xtrmtrk
...ake sure your shaft clears the space for it inside this mount. if there's any rubbing and friction you'll have problems!
thingiverse
free
![Strix StratoSurfer Parts v1 by markqv](/t/8596254.jpg)
Strix StratoSurfer Parts v1 by markqv
...e printed at 80% infil, all others are 20-40%
print orientation is dependent on printer/slicer set-up, please rotate if necessary
thingiverse
free
![Stratosurfer GoPro Hero7 and dual FPV camera mount by kdamon](/t/8147788.jpg)
Stratosurfer GoPro Hero7 and dual FPV camera mount by kdamon
...amon
thingiverse
mount i made to hold a gopro hero7, a foxeer micro camera, and dji camera on a servo os they're all on pan.
Markqv
thingiverse
free
![OrangeRX Transmitter (TX) Cover by markqv](/t/8949237.jpg)
OrangeRX Transmitter (TX) Cover by markqv
... (tx) cover by markqv
thingiverse
a replacement orangerx, jr module cover which moves the antenna sma port to a usable position.
thingiverse
free
![Dynamic Motor and Prop Balancer by markqv](/t/8636073.jpg)
Dynamic Motor and Prop Balancer by markqv
...ynamic-propeller-balancer-build
to see my complete build:http://www.itsqv.com/qvm/index.php?title=dynamic_motor_and_prop_balancer
thingiverse
free
![FrSky/Turnigy Gimbal Savers by markqv](/t/8782882.jpg)
FrSky/Turnigy Gimbal Savers by markqv
... extension screw acting to hold it all in place. the turnigy 9xr set is four pieces and snaps together with a small center piece.
thingiverse
free
![Turnigy 9XR & 9XR Pro Feet and Stand by markqv](/t/8949270.jpg)
Turnigy 9XR & 9XR Pro Feet and Stand by markqv
...d 1/23 - added more material around the screw)
download and print the two stand parts and you'll have all your bases covered.
thingiverse
free
![Eagle Tree Vector - Pitot Tube Mount #2 by markqv](/t/8682565.jpg)
Eagle Tree Vector - Pitot Tube Mount #2 by markqv
...e. the base has two 1.6mm holes which are tapped for m2 screws. i recommend printing at 0.1mm resolution and a fairly slow speed.
thingiverse
free
![X-UAV Talon Rear Skid by markqv](/t/8306061.jpg)
X-UAV Talon Rear Skid by markqv
...ing bed
overhang angle - 70 degrees
support infill - 12%
print speed - 40mm/sec
print density - 65% or higher
target weight - 16g
thingiverse
free
![RunCam Split -v2- Simple Case by markqv](/t/8611803.jpg)
RunCam Split -v2- Simple Case by markqv
...; v2, please see my pan and tilt parts catalog here - http://www.itsqv.com/qvm/index.php?title=parts_catalog_-_pan_and_tilt_parts
thingiverse
free
![Lipo Battery Strap Guide by markqv](/t/8784910.jpg)
Lipo Battery Strap Guide by markqv
...d it also keeps the strap from being damaged on landing. inside the fuse i glue down strips of velcro to help stabilize the pack.
thingiverse
free
![Collapsible Bungee Tow Hook by markqv](/t/8802498.jpg)
Collapsible Bungee Tow Hook by markqv
... find the aluminum tube material at a local hobby store. then follow the picture on drilling and shaping the tube befor assembly.
thingiverse
free
![Zeta Phantom FX-61 Parts v1 by markqv](/t/8820789.jpg)
Zeta Phantom FX-61 Parts v1 by markqv
...re: http://www.itsqv.com/qvm/index.php?title=zeta_fx-61_phantom_wing_number_2
all parts were printed in pla.
happy printing!
mark
Strix
turbosquid
$15
![Motherboard ASUS ROG STRIX Z370-E Gaming 2020](/t/13286887.jpg)
Motherboard ASUS ROG STRIX Z370-E Gaming 2020
... strix z370-e gaming 2020 for download as , stl, dae, and obj on turbosquid: 3d models for games, architecture, videos. (1638734)
3d_export
$60
![eurocopter ec665 arh tiger australian scheme](/t/11402819.jpg)
eurocopter ec665 arh tiger australian scheme
...as well as a laser designator incorporated in the strix sight for the firing of hellfire ii air-to-ground missiles....
thingiverse
free
![Strix Goblin Starthaken by Kryptoo](/t/8598065.jpg)
Strix Goblin Starthaken by Kryptoo
...strix goblin starthaken by kryptoo
thingiverse
starthaken für den strix goblin.
thingiverse
free
![strix goblin](/t/4870217.jpg)
strix goblin
...strix goblin
thingiverse
just a goblin drown by looking at the google photos
thingiverse
free
![Strix Screech AXII by 727-FPV](/t/8538751.jpg)
Strix Screech AXII by 727-FPV
...strix screech axii by 727-fpv
thingiverse
strix screech axii --v2-- now...
thingiverse
free
![Strix Goblin - Servo Covers by addyc1986](/t/8296177.jpg)
Strix Goblin - Servo Covers by addyc1986
...strix goblin - servo covers by addyc1986
thingiverse
strix goblin - left and right servo covers
thingiverse
free
![Strix Screech-R Hero8 Sleeve](/t/4984063.jpg)
Strix Screech-R Hero8 Sleeve
...strix screech-r hero8 sleeve
thingiverse
strix screech-r gopro hero8 mount.
thingiverse
free
![Strix Screech Hoot Antenna Mount by GarrettL](/t/8310048.jpg)
Strix Screech Hoot Antenna Mount by GarrettL
...x screech hoot antenna mount by garrettl
thingiverse
strix hoot 5.8ghz antenna mmcx mount for the strix screech.
print in flex
thingiverse
free
![Asus ROG Strix Logo by Zoren](/t/8502797.jpg)
Asus ROG Strix Logo by Zoren
...asus rog strix logo by zoren
thingiverse
asus rog strix led logohttps://www.youtube.com/watch?v=lti-_-qleai
thingiverse
free
![STRIX Nano Goblin Tarsier caddx by Vladimir_G](/t/8633535.jpg)
STRIX Nano Goblin Tarsier caddx by Vladimir_G
...strix nano goblin tarsier caddx by vladimir_g
thingiverse
strix nano goblin tarsier caddx
Canopy
3d_ocean
$10
![Canopy](/t/581767.jpg)
Canopy
...canopy
3docean
building canopy
building canopy stair
3d_ocean
$8
![Canopy](/t/588583.jpg)
Canopy
...canopy
3docean
building canopy
building canopy and stair
archibase_planet
free
![Canopy](/t/951230.jpg)
Canopy
...canopy
archibase planet
canopy bed canopy awning
canopy - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Canopy](/t/951193.jpg)
Canopy
...canopy
archibase planet
awning shed canopy
canopy - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Canopy](/t/951226.jpg)
Canopy
...canopy
archibase planet
canopy curtain
canopy n070414 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Canopy](/t/951236.jpg)
Canopy
...canopy
archibase planet
canopy awning overhang
canopy - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Canopy](/t/951817.jpg)
Canopy
...canopy
archibase planet
canopy awning overhang
canopy - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
![Canopy](/t/951222.jpg)
Canopy
...canopy
archibase planet
canopy awning bed curtains
canopy n250211 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
![Canopy](/t/951233.jpg)
Canopy
...canopy
archibase planet
canopy awning overhang
canopy n130814 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Canopy](/t/951235.jpg)
Canopy
...canopy
archibase planet
canopy awning overhang
canopy 2 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
Small
3d_export
$10
![small bed](/t/11730810.jpg)
small bed
...small bed
3dexport
small bed design for small house or small room with storage
3d_export
$10
![small house](/t/11496260.jpg)
small house
...small house
3dexport
a small house. the project of a small country house.
3d_ocean
$4
![Small Cake](/t/560385.jpg)
Small Cake
...small cake
3docean
cake food small
just a small cake ready for render
3d_export
$6
![small armchair](/t/11427702.jpg)
small armchair
...small armchair
3dexport
small armchair
3d_export
$5
![a small world](/t/11419424.jpg)
a small world
...a small world
3dexport
a small world
3d_export
$5
![small room](/t/11888324.jpg)
small room
...small room
3dexport
small cozy room
3d_export
$5
![small tank](/t/11462102.jpg)
small tank
...small tank
3dexport
small tank modeling in blender
design_connected
free
![small lounge](/t/4567262.jpg)
small lounge
...small lounge
designconnected
free 3d model of small lounge
design_connected
$11
![Watermelons Small](/t/7933020.jpg)
Watermelons Small
...watermelons small
designconnected
watermelons small computer generated 3d model.
3d_export
$5
![small house](/t/11422098.jpg)
small house
...small house
3dexport
a small cozy house on the foundation, the interior is missing.