Thingiverse
Streamlined 9g servo and VTX housing for FPV PAN camera by Gman_Error404
by Thingiverse
Last crawled date: 4 years, 2 months ago
Here's a streamlined housing for a 9g servo and VTX to PAN an FPV camera on my Phoenix 1600.
This housing will fit a VTX with similar dimensions to the Eachine TX525.
The tabs on the side of the housing can be heated to fit your aircraft. Secured with double sided tape or Velcro.
Also included is a mount for a micro sized camera. It will fit and glue to a cut down 9g servo horn. Support needed to print this part.
You may also have the cut down the servo mounting tab closest to the VTX to make room for the wiring.
I power both the Camera and VTX direct from the balance port of a 3S battery. Check your voltage ratings.
Hope you get some use out of it......
https://youtu.be/aTm4ujf7Jxs
This housing will fit a VTX with similar dimensions to the Eachine TX525.
The tabs on the side of the housing can be heated to fit your aircraft. Secured with double sided tape or Velcro.
Also included is a mount for a micro sized camera. It will fit and glue to a cut down 9g servo horn. Support needed to print this part.
You may also have the cut down the servo mounting tab closest to the VTX to make room for the wiring.
I power both the Camera and VTX direct from the balance port of a 3S battery. Check your voltage ratings.
Hope you get some use out of it......
https://youtu.be/aTm4ujf7Jxs