Thingiverse
STM32F407VE development board case by grafalex
by Thingiverse
Last crawled date: 4 years, 8 months ago
This is a case to protect STM32F407VE development board. It respects all connectors as well as LEDs.
Printing:
Print 2 case halves, each of 2 pieces (Cap + Body). Glue Cap to the Body (I used acethone for parts printed in ABS)
Use few pieces of a transparent filament as a light guide for LEDs. You may want to glue light guides with a hot gun
Install buttons. Button holes as well as buttons may need some sanding
Screw board with the case with four M3x6 screws
Printing:
Print 2 case halves, each of 2 pieces (Cap + Body). Glue Cap to the Body (I used acethone for parts printed in ABS)
Use few pieces of a transparent filament as a light guide for LEDs. You may want to glue light guides with a hot gun
Install buttons. Button holes as well as buttons may need some sanding
Screw board with the case with four M3x6 screws