Thingiverse
Steckdose Typ F plug socket by FlorenzW
by Thingiverse
Last crawled date: 4 years ago
Front piece of a EU style socket. Fits perfectly to Busch-Jäger parts but might be suitable for other brands as well.
This ingenious sentence and the inspiration come from this thing:https://www.thingiverse.com/thing:3207286
Thank you herrier!
You will need a lot of support. Make sure that the orientation of the support material is rotated 90 degrees to the orientation of the support knobs on the back.
Don't skimp on plastic. Print it with a wall thickness of 1.6mm to the sides, 1.2mm to top and buttom and 40% infill.
Designed with FreeCAD, source file included.
This ingenious sentence and the inspiration come from this thing:https://www.thingiverse.com/thing:3207286
Thank you herrier!
You will need a lot of support. Make sure that the orientation of the support material is rotated 90 degrees to the orientation of the support knobs on the back.
Don't skimp on plastic. Print it with a wall thickness of 1.6mm to the sides, 1.2mm to top and buttom and 40% infill.
Designed with FreeCAD, source file included.