Thingiverse
Starlink DirecTV J Pipe adapter by ArmedMonkey
by Thingiverse
Last crawled date: 4 years, 2 months ago
A thicker adapter for Starlink's Dishy McFlatface. This one fits snugly inside a 45.5mm DirecTV J-Pipe.
Remove the dish and pop out the plastic bubble level then drill two 1/2" holes in the top of the J-Pipe. Make sure you drill the 2 holes in the J-Pipe 180 degrees apart or the bolt won't come out the other side.
A 1/2" Bolt is is required.
Don't forget the drip loop!
Remove the dish and pop out the plastic bubble level then drill two 1/2" holes in the top of the J-Pipe. Make sure you drill the 2 holes in the J-Pipe 180 degrees apart or the bolt won't come out the other side.
A 1/2" Bolt is is required.
Don't forget the drip loop!