Thingiverse
Starlink Accessories by stageone
by Thingiverse
Last crawled date: 3 years ago
I plan on creating installation accessories for Starlink. I am currently waiting for mine to arrive as of Early 2021 so these are at the moment untested. I'm hoping that others can print and test as required.
Part_A is a 1" plug cover that will help seal a 1" hole after installing the Cat 6 23AWG wire included with the Starlink hardware. 2 copies for inside and outside walls can be printed and assist with plugging the hole. I would suggest that weather proof caulk should also be applied at the perimeter to help keep out moisture.
Part_A is a 1" plug cover that will help seal a 1" hole after installing the Cat 6 23AWG wire included with the Starlink hardware. 2 copies for inside and outside walls can be printed and assist with plugging the hole. I would suggest that weather proof caulk should also be applied at the perimeter to help keep out moisture.
Similar models
thingiverse
free
3/4" Escutcheon Plate for Starlink by theRatchet
...screw holes are for #6 screws.
i applied caulk to the back side of it and then attached.
print 2; the half's are identical.
thingiverse
free
Lamp 1/2" Hole Fill Plug by henryarnold
...mps i was working on as shown in the photo. it snaps into place and plugs the hole. i suggest using abs for outside applications.
thingiverse
free
Starlink Internet House entry by Humanshield1981
...icolor logo you would also need to do a pause/fliament swap for that. both are optional but makes for a nicer end result i feel.
thingiverse
free
Peg Board Accessories by Print_INTELLI
...ntelli
thingiverse
peg board accessories to help keep the workspace organized. .25" diameter hole 1" spacing pegboard.
thingiverse
free
1.5" to 2-1/8 plug for drilling out larger hole for new deadbolt by toyotaboy02
... from the existing position. i recommend printing 2, one for each side (most cutters won't go all the way through the door).
thingiverse
free
Lettuce Grow Hole Plug by Jessetwohands
...together. if you want to save printing time you can just print the plug part without the handle and it will still work correctly.
grabcad
free
1/2" NPT plug
...t cast 316 stainless plug. the threads are cut so can be 3d printed, have verified the model fits in 1/2" npt threaded hole.
thingiverse
free
StarLink EMT Adapter by webguynj
...; from end of conduit, use existing spring connectors or replace with 1/2" x 2" bolt with double nuts to lock in place
thingiverse
free
Yosemite X-Dirt frame plug by _Hunter_
...or wires yet but will do it when i mount a gearsensor on my bike.
rotate it 180 degrees for printing it with the outer side down.
grabcad
free
1-1/8" Dia Hole Saw
...depth, 1" wrench flats on a 1/2"-20 threaded base. produces a 1" dia plug. clearance holes on side to remove plug.
Stageone
thingiverse
free
WD MyBook Wall Mount by stageone
...mybook wall mount by stageone
thingiverse
simple wall mount for the western digital mybook. print two and mount using #8 screws.
thingiverse
free
Reusable Flosser by stageone
...first design attempt. if you print and use one please let me know how it worked and if you have some suggestions for improvement.
thingiverse
free
Arlo Pro 45* Mount by stageone
...e i needed to achieve would not work with the included mounts. this adds an extra 45 degrees to allow for improved camera angles.
thingiverse
free
Descent Card Book Box (Sleeved) by stageone
...ned to look like a book. sleeved cards will display class and look great printed in the class colors. a divider is also included.
thingiverse
free
Ciclop 3D scanner plate by stageone
...on the sides to refine the look of the turntable.
it is yet untested using calibration as i am still in the middle of the build.
thingiverse
free
MacBook Air (2017) Wall Mount by stageone
...eed to keep your macbook air safely mounted on the wall. the slot is 21mm wide so may accommodate more types of laptop computers.
thingiverse
free
Ghostly Automata Sound Wave by stageone
...015. this was desgned before i had a 3d printer. i have never printed it and expect that most of the parts need to be redesigned.
thingiverse
free
Merkur 23C travel case by stageone
...new case to accommodate. it will allow for storage of extra blades and the razor. it also has a built in stand while on the road.
thingiverse
free
X-Wing Proximity Bomb (UPDATED) by stageone
...hin 0.1mm. update: made a change to the piece to better match cardboard cutout. also removed to antenna fo a better print result.
Starlink
thingiverse
free
Starlink-Dungeonstick Couplers by Matt73r
... and dungeon stick walls. i mixed the ends of evan carothers dungeon sticks caverns and devon jones dungeon stone starlink walls.
thingiverse
free
Dungeonsticks: Starlink Jail cell
...rlink jail cell
thingiverse
this is a mix of the dungeonsticks starlink templates and the openforge dungeon stone jail cell 2x3.
thingiverse
free
Starlink Router Base by Vmtr
...verse
the router that is included with the starlink antenna (dish) is a little unstable. this base stabilizes it. it snaps on.
thingiverse
free
DungeonSticks: Starlink - Stairs Up
...l stairs, so i remixed this one using meshmixer.
it should be the same length as a the longer wall in the original starlink file.
thingiverse
free
Starlink display by MorganCoLLC
...pilot either inside or outside of their ship. it can print without supports but i would recommend using them for a cleaner print.
free3d
free
Sci-fi Computer Terminal ( Starlink S101 )
...sci-fi computer terminal ( starlink s101 )
free3d
blender
thingiverse
free
Starlink Dishy Fence Post mount by jacky4566
...ount for starlink dishy. 120mm diameter with 4 screws. accepts 3/8in bolt for security.
i would suggest petg for uv and strength.
thingiverse
free
StarLink EMT Adapter by webguynj
...; from end of conduit, use existing spring connectors or replace with 1/2" x 2" bolt with double nuts to lock in place
thingiverse
free
DungeonSticks(starlink) Tudor-walls and houses by somerandomperson412
...ng the starlink v3 system, except for the expandable walls cuz i hate them, :b
credits to krolbren for modeling thease for me! :d
Accessories
3ddd
$1
accessories
...accessories
3ddd
чаша
accessories
3ddd
$1
accessories
...accessories
3ddd
статуэтка
accessories
3ddd
$1
accessories
...accessories
3ddd
статуэтка
accessories
3ddd
$1
accessories
...accessories
3ddd
статуэтка
accessories
archibase_planet
free
Accessories
...accessories
archibase planet
fireplace accessories
accessories - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Accessories
...accessories
archibase planet
fireplace accessories
accessories - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Accessory
...accessory archibase planet art accessories design creative accessory f1137 - 3d model for interior...
archibase_planet
free
Accessories
...accessories
archibase planet
kitchen ware kitchen accessories
accessories - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Accessories
...accessories
archibase planet
poker fireplace accessory
accessories 3 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Accessories
...essories
archibase planet
kitchen accessories pots and pans cooking battery
accessories - 3d model for interior 3d visualization.